口腔材料器械杂志
口腔材料器械雜誌
구강재료기계잡지
CHINESE JOURNAL OF DENTAL MATERIALS AND DEVICES
2006年
4期
194-196,204
,共4页
潘益华%潘鸣镝%郑幼洋%李超伦%张濒
潘益華%潘鳴鏑%鄭幼洋%李超倫%張瀕
반익화%반명적%정유양%리초륜%장빈
根面龋%复合体%粘结银汞合金%银汞合金%玻璃离子%微渗漏
根麵齲%複閤體%粘結銀汞閤金%銀汞閤金%玻璃離子%微滲漏
근면우%복합체%점결은홍합금%은홍합금%파리리자%미삼루
目的 比较四种充填材料修复根面龋的充填体边缘微渗漏情况.方法 将制备洞型后的44颗离体牙随机分为4组,每组11个牙,备洞后分别采用复合体(3M F2000,简称Co组)、粘结银汞合金(黏结剂为3M A Adper Prompt,简称Ad组)、银汞合金(杭州银亚新高铜球形银汞胶囊,简称Am组)和玻璃离子(3MKetac,简称Ke组)材料充填,进行染料渗透试验.在0lympus GM型暗视野实体显微镜下观察并测量次甲基兰渗漏深入的部位,取根面龋离体牙20个,采用4种临床常用材料分别充填后在扫描电镜下观察充填材料和牙齿密合度并拍摄照片.结果 使用复合体充填产生的微渗漏最小(0.03~0.76mm),其次为黏结银汞(0.44~0.82mm)和银汞(0.89~1.59mm),玻璃离子产生的微渗漏最大(1.73~2.58mm).结论 复合体充填材料能够更好地预防继发龋和充填物脱落.
目的 比較四種充填材料脩複根麵齲的充填體邊緣微滲漏情況.方法 將製備洞型後的44顆離體牙隨機分為4組,每組11箇牙,備洞後分彆採用複閤體(3M F2000,簡稱Co組)、粘結銀汞閤金(黏結劑為3M A Adper Prompt,簡稱Ad組)、銀汞閤金(杭州銀亞新高銅毬形銀汞膠囊,簡稱Am組)和玻璃離子(3MKetac,簡稱Ke組)材料充填,進行染料滲透試驗.在0lympus GM型暗視野實體顯微鏡下觀察併測量次甲基蘭滲漏深入的部位,取根麵齲離體牙20箇,採用4種臨床常用材料分彆充填後在掃描電鏡下觀察充填材料和牙齒密閤度併拍攝照片.結果 使用複閤體充填產生的微滲漏最小(0.03~0.76mm),其次為黏結銀汞(0.44~0.82mm)和銀汞(0.89~1.59mm),玻璃離子產生的微滲漏最大(1.73~2.58mm).結論 複閤體充填材料能夠更好地預防繼髮齲和充填物脫落.
목적 비교사충충전재료수복근면우적충전체변연미삼루정황.방법 장제비동형후적44과리체아수궤분위4조,매조11개아,비동후분별채용복합체(3M F2000,간칭Co조)、점결은홍합금(점결제위3M A Adper Prompt,간칭Ad조)、은홍합금(항주은아신고동구형은홍효낭,간칭Am조)화파리리자(3MKetac,간칭Ke조)재료충전,진행염료삼투시험.재0lympus GM형암시야실체현미경하관찰병측량차갑기란삼루심입적부위,취근면우리체아20개,채용4충림상상용재료분별충전후재소묘전경하관찰충전재료화아치밀합도병박섭조편.결과 사용복합체충전산생적미삼루최소(0.03~0.76mm),기차위점결은홍(0.44~0.82mm)화은홍(0.89~1.59mm),파리리자산생적미삼루최대(1.73~2.58mm).결론 복합체충전재료능구경호지예방계발우화충전물탈락.