过程工程学报
過程工程學報
과정공정학보
The Chinese Journal of Process Engineering
2010年
z1期
183-188
,共6页
胡祖瑞%程树森%郭喜斌%张福明
鬍祖瑞%程樹森%郭喜斌%張福明
호조서%정수삼%곽희빈%장복명
旋流顶燃式热风炉%数值模拟%传输现象
鏇流頂燃式熱風爐%數值模擬%傳輸現象
선류정연식열풍로%수치모의%전수현상
针对宣钢旋流顶燃式热风炉的燃烧室,建立了气体流动、传热及燃烧的数学模型,通过数值模拟研究了燃烧室的流场、温度场和CO浓度场.结果表明,热风炉燃烧室出口速度和温度分布很不均匀;由于空气过剩系数过低,导致燃烧室出口有6%的CO剩余,火焰贴近燃烧室壁面,严重影响热风炉的寿命.将空气过剩系数增加到1.05后比较发现,燃烧室出口CO质最分数低于1%,火焰分布更加合理,增加燃烧室高度能有效提高燃烧室出口速度和温度的分布均匀性,速度最大差由10m/s降到约2m/s,温度最大差由140℃降到约90℃.
針對宣鋼鏇流頂燃式熱風爐的燃燒室,建立瞭氣體流動、傳熱及燃燒的數學模型,通過數值模擬研究瞭燃燒室的流場、溫度場和CO濃度場.結果錶明,熱風爐燃燒室齣口速度和溫度分佈很不均勻;由于空氣過剩繫數過低,導緻燃燒室齣口有6%的CO剩餘,火燄貼近燃燒室壁麵,嚴重影響熱風爐的壽命.將空氣過剩繫數增加到1.05後比較髮現,燃燒室齣口CO質最分數低于1%,火燄分佈更加閤理,增加燃燒室高度能有效提高燃燒室齣口速度和溫度的分佈均勻性,速度最大差由10m/s降到約2m/s,溫度最大差由140℃降到約90℃.
침대선강선류정연식열풍로적연소실,건립료기체류동、전열급연소적수학모형,통과수치모의연구료연소실적류장、온도장화CO농도장.결과표명,열풍로연소실출구속도화온도분포흔불균균;유우공기과잉계수과저,도치연소실출구유6%적CO잉여,화염첩근연소실벽면,엄중영향열풍로적수명.장공기과잉계수증가도1.05후비교발현,연소실출구CO질최분수저우1%,화염분포경가합리,증가연소실고도능유효제고연소실출구속도화온도적분포균균성,속도최대차유10m/s강도약2m/s,온도최대차유140℃강도약90℃.