声学技术
聲學技術
성학기술
Technical Acousitics
2012年
4期
381-384
,共4页
水下等离子体声源%正交试验%最优化设计%液电效应
水下等離子體聲源%正交試驗%最優化設計%液電效應
수하등리자체성원%정교시험%최우화설계%액전효응
水下等离子体声源在民用和军用领域都有广泛的应用,其发声机理和系统最优化设计是当前的研究热点.为了使声源的输出峰值压力y尽可能大,设计了放电电极间距(2mm,3mm,4mm)、储能电容容量(1uF,2uF,5uF)和充电电压(12kV, 16kV,20kV)的三因素三水平正交试验方案,严格按照正交试验安排表进行试验,并用直观分析法对试验结果进行分析.结果表明:最优化的试验组合方案为A1B3C2,即放点电极间距2mm,储能电容容量5uF,充电电压16kV,估计出其峰值压力为9.864MPa,并通过试验验证了平均峰值压力为10.165MPa,与正交试验结论相符.该研究成果为水下离子体声源性能试验研究和最优化设计提供了依据.
水下等離子體聲源在民用和軍用領域都有廣汎的應用,其髮聲機理和繫統最優化設計是噹前的研究熱點.為瞭使聲源的輸齣峰值壓力y儘可能大,設計瞭放電電極間距(2mm,3mm,4mm)、儲能電容容量(1uF,2uF,5uF)和充電電壓(12kV, 16kV,20kV)的三因素三水平正交試驗方案,嚴格按照正交試驗安排錶進行試驗,併用直觀分析法對試驗結果進行分析.結果錶明:最優化的試驗組閤方案為A1B3C2,即放點電極間距2mm,儲能電容容量5uF,充電電壓16kV,估計齣其峰值壓力為9.864MPa,併通過試驗驗證瞭平均峰值壓力為10.165MPa,與正交試驗結論相符.該研究成果為水下離子體聲源性能試驗研究和最優化設計提供瞭依據.
수하등리자체성원재민용화군용영역도유엄범적응용,기발성궤리화계통최우화설계시당전적연구열점.위료사성원적수출봉치압력y진가능대,설계료방전전겁간거(2mm,3mm,4mm)、저능전용용량(1uF,2uF,5uF)화충전전압(12kV, 16kV,20kV)적삼인소삼수평정교시험방안,엄격안조정교시험안배표진행시험,병용직관분석법대시험결과진행분석.결과표명:최우화적시험조합방안위A1B3C2,즉방점전겁간거2mm,저능전용용량5uF,충전전압16kV,고계출기봉치압력위9.864MPa,병통과시험험증료평균봉치압력위10.165MPa,여정교시험결론상부.해연구성과위수하리자체성원성능시험연구화최우화설계제공료의거.