中国化学工程学报(英文版)
中國化學工程學報(英文版)
중국화학공정학보(영문판)
CHINESE JOURNAL OF CHEMICAL ENGINEERING
2003年
6期
691-695
,共5页
asphalt%particle%solvent%recovery%supercritical fluid extraction
A continuous three-stage supercritical fluid extraction (SFE) process with a capacity of 1.0 kg·h-1 was setup to extract petroleum residue by pentane to obtain more oil for further upgrading. A discharging system integrated to the bottom of the extractor was used to recover solvent as gas while asphalt was obtained as fine particles. The influence of operating conditions on the yield and quality of extracts, i.e., deasphalted oil (DAO) and resin, was studied in the range of temperature 150-220℃, pressure of 4.0-6.0 MPa and the mass ratio of solvent to oil feed (S/O) 2.5-5.0. The particle size distribution, apparent forms and the packing density, which vary with operating pressure, were measured. The particle structures were observed by SEM as well. With the modification to conventional processes, furnace can be eliminated for solvent recovery from asphalt phase, so as to reduce energy consumption.
