化工学报
化工學報
화공학보
JOURNAL OF CHEMICAL INDUSY AND ENGINEERING (CHINA)
2012年
8期
2392-2397
,共6页
弓凯雷%王德武%刘燕%张少峰
弓凱雷%王德武%劉燕%張少峰
궁개뢰%왕덕무%류연%장소봉
海水淡化%循环流化床%蒸发%浓缩比%防除垢
海水淡化%循環流化床%蒸髮%濃縮比%防除垢
해수담화%순배류화상%증발%농축비%방제구
提高海水淡化操作浓缩比,不仅可以提高造水比,还可以有效降低淡化后浓海水再利用的后处理成本,故其是实现低成本零排放的关键之一.在一套循环流化床多相蒸发海水淡化实验装置上,分别采用汽-液两相及汽-液-固三相操作,考察固体颗粒对海水淡化操作浓缩比及膜传热系数的影响,并分析垢层的主要成分.实验表明:高温下CaSO4首先析出,是形成垢层的主要成分;采取汽-液两相操作,膜传热系数保持在1.75 kW·m-2·K-1左右,操作浓缩比可达到3.8左右;采取汽-液-固三相操作,固体颗粒强化传热和防除垢的作用显著,加入颗粒体积分数为4%时,在膜传热系数保持在2.3 kW·m-2·K-1左右不降低的情况下,海水淡化操作浓缩比达到5.8以上.
提高海水淡化操作濃縮比,不僅可以提高造水比,還可以有效降低淡化後濃海水再利用的後處理成本,故其是實現低成本零排放的關鍵之一.在一套循環流化床多相蒸髮海水淡化實驗裝置上,分彆採用汽-液兩相及汽-液-固三相操作,攷察固體顆粒對海水淡化操作濃縮比及膜傳熱繫數的影響,併分析垢層的主要成分.實驗錶明:高溫下CaSO4首先析齣,是形成垢層的主要成分;採取汽-液兩相操作,膜傳熱繫數保持在1.75 kW·m-2·K-1左右,操作濃縮比可達到3.8左右;採取汽-液-固三相操作,固體顆粒彊化傳熱和防除垢的作用顯著,加入顆粒體積分數為4%時,在膜傳熱繫數保持在2.3 kW·m-2·K-1左右不降低的情況下,海水淡化操作濃縮比達到5.8以上.
제고해수담화조작농축비,불부가이제고조수비,환가이유효강저담화후농해수재이용적후처리성본,고기시실현저성본령배방적관건지일.재일투순배류화상다상증발해수담화실험장치상,분별채용기-액량상급기-액-고삼상조작,고찰고체과립대해수담화조작농축비급막전열계수적영향,병분석구층적주요성분.실험표명:고온하CaSO4수선석출,시형성구층적주요성분;채취기-액량상조작,막전열계수보지재1.75 kW·m-2·K-1좌우,조작농축비가체도3.8좌우;채취기-액-고삼상조작,고체과립강화전열화방제구적작용현저,가입과립체적분수위4%시,재막전열계수보지재2.3 kW·m-2·K-1좌우불강저적정황하,해수담화조작농축비체도5.8이상.