东南大学学报(自然科学版)
東南大學學報(自然科學版)
동남대학학보(자연과학판)
JOURNAL OF SOUTHEAST UNIVERSITY
2006年
6期
951-955
,共5页
于金%吴三械%董岩%谈荣生%朱鸣芳
于金%吳三械%董巖%談榮生%硃鳴芳
우금%오삼계%동암%담영생%주명방
锶%铝热还原法%XRD%定量分析%锶还原率
鍶%鋁熱還原法%XRD%定量分析%鍶還原率
송%려열환원법%XRD%정량분석%송환원솔
为提高锶还原率,研究了真空铝热还原法制备金属锶的反应机理.对锶还原率和渣相间关系进行了理论分析;对实际锶还原率进行了计量;并对实际渣相进行了XRD定量分析.理论分析认为,锶还原率越高,则渣相中SrO·Al2O3相数量越多.实验结果表明:制备的金属Sr纯度可达99.5%以上;实际渣相中SrO·Al2O3相质量分数大大高于理论值;且实际锶还原率越低,渣相中SrO·Al2O3相质量分数反而越高.分析认为,原料Al粉被氧化后生成Al2O3,会大量消耗原料SrO,生成SrO·Al2O3相.尽量减少原料Al粉被氧化,是保证高锶还原率的关键.
為提高鍶還原率,研究瞭真空鋁熱還原法製備金屬鍶的反應機理.對鍶還原率和渣相間關繫進行瞭理論分析;對實際鍶還原率進行瞭計量;併對實際渣相進行瞭XRD定量分析.理論分析認為,鍶還原率越高,則渣相中SrO·Al2O3相數量越多.實驗結果錶明:製備的金屬Sr純度可達99.5%以上;實際渣相中SrO·Al2O3相質量分數大大高于理論值;且實際鍶還原率越低,渣相中SrO·Al2O3相質量分數反而越高.分析認為,原料Al粉被氧化後生成Al2O3,會大量消耗原料SrO,生成SrO·Al2O3相.儘量減少原料Al粉被氧化,是保證高鍶還原率的關鍵.
위제고송환원솔,연구료진공려열환원법제비금속송적반응궤리.대송환원솔화사상간관계진행료이론분석;대실제송환원솔진행료계량;병대실제사상진행료XRD정량분석.이론분석인위,송환원솔월고,칙사상중SrO·Al2O3상수량월다.실험결과표명:제비적금속Sr순도가체99.5%이상;실제사상중SrO·Al2O3상질량분수대대고우이론치;차실제송환원솔월저,사상중SrO·Al2O3상질량분수반이월고.분석인위,원료Al분피양화후생성Al2O3,회대량소모원료SrO,생성SrO·Al2O3상.진량감소원료Al분피양화,시보증고송환원솔적관건.