热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2010年
14期
1-3,6
,共4页
陶平均%杨元政%赵德强%白晓军
陶平均%楊元政%趙德彊%白曉軍
도평균%양원정%조덕강%백효군
大块非晶合金%等温退火%显微硬度%应力-应变曲线%抗压强度
大塊非晶閤金%等溫退火%顯微硬度%應力-應變麯線%抗壓彊度
대괴비정합금%등온퇴화%현미경도%응력-응변곡선%항압강도
通过铜模真空吸铸法制备出直径为2mm的Fe60Co8Zr10Mo5W2B15非晶合金棒,采用X射线衍射仪、示差扫描量热仪、显微硬度仪及万能试验机,研究了该非晶合金的结构和热稳定性及等温退火对其力学性能的影响.结果表明,该非晶合金的显微硬度、抗压强度和相对应变率分别为1343 HV、972.6 MPa和0.059%;在过冷液相区内退火,合金的显微硬度有所下降,而高于晶化温度退火,合金的显微硬度增大,显微硬度整体表现为随退火温度的升高逐渐增大的变化趋势;压缩变形过程中合金只表现出弹性变形,随退火温度的升高,合金抗压强度和相对应变率均逐渐下降.
通過銅模真空吸鑄法製備齣直徑為2mm的Fe60Co8Zr10Mo5W2B15非晶閤金棒,採用X射線衍射儀、示差掃描量熱儀、顯微硬度儀及萬能試驗機,研究瞭該非晶閤金的結構和熱穩定性及等溫退火對其力學性能的影響.結果錶明,該非晶閤金的顯微硬度、抗壓彊度和相對應變率分彆為1343 HV、972.6 MPa和0.059%;在過冷液相區內退火,閤金的顯微硬度有所下降,而高于晶化溫度退火,閤金的顯微硬度增大,顯微硬度整體錶現為隨退火溫度的升高逐漸增大的變化趨勢;壓縮變形過程中閤金隻錶現齣彈性變形,隨退火溫度的升高,閤金抗壓彊度和相對應變率均逐漸下降.
통과동모진공흡주법제비출직경위2mm적Fe60Co8Zr10Mo5W2B15비정합금봉,채용X사선연사의、시차소묘량열의、현미경도의급만능시험궤,연구료해비정합금적결구화열은정성급등온퇴화대기역학성능적영향.결과표명,해비정합금적현미경도、항압강도화상대응변솔분별위1343 HV、972.6 MPa화0.059%;재과랭액상구내퇴화,합금적현미경도유소하강,이고우정화온도퇴화,합금적현미경도증대,현미경도정체표현위수퇴화온도적승고축점증대적변화추세;압축변형과정중합금지표현출탄성변형,수퇴화온도적승고,합금항압강도화상대응변솔균축점하강.