精细化工中间体
精細化工中間體
정세화공중간체
FINE CHEMICAL INTERMEDIATES
2010年
1期
46-51
,共6页
袁桂芳%罗梦%张芳%舒友亮%苏胜培
袁桂芳%囉夢%張芳%舒友亮%囌勝培
원계방%라몽%장방%서우량%소성배
造纸黑液干粉%聚氯乙烯%氯化聚乙烯%热塑性弹性体
造紙黑液榦粉%聚氯乙烯%氯化聚乙烯%熱塑性彈性體
조지흑액간분%취록을희%록화취을희%열소성탄성체
以造纸黑液经硫酸中和处理脱水后的黑液干粉为填料,采用熔融共混法制备了聚氯乙烯(PVC)/氯化聚乙烯(CPE)/黑液干粉热塑性弹性体复合材料.利用FTIR和TGA测试了黑液干粉的结构和热性能;利用微控电子万能试验机、TGA研究了黑液干粉含量对弹性体复合材料的力学性能、热降解性能和老化性能的影响.结果表明:黑液干粉中木质素等有机物含量为33%;添加黑液干粉能改善PVC/CPE弹性体复合材料的力学性能,当黑液干粉含量为30 phr时,拉伸强度保持不变,断裂伸长率提高了8%,撕裂强度提高了5%;采用硬脂酸处理的黑液干粉,其用量为30 phr时,复合材料综合性能较佳,其拉伸强度提高了7%,断裂伸长率提高了12%,撕裂强度提高了18%;黑液干粉含量30 phr时,PVC/CPE弹性体复合材料热降解温度提高了5℃:添加黑液干粉的复合材料,在热氧老化后拉伸强度和邵尔A型硬度增加,断裂伸长率稍有下降.
以造紙黑液經硫痠中和處理脫水後的黑液榦粉為填料,採用鎔融共混法製備瞭聚氯乙烯(PVC)/氯化聚乙烯(CPE)/黑液榦粉熱塑性彈性體複閤材料.利用FTIR和TGA測試瞭黑液榦粉的結構和熱性能;利用微控電子萬能試驗機、TGA研究瞭黑液榦粉含量對彈性體複閤材料的力學性能、熱降解性能和老化性能的影響.結果錶明:黑液榦粉中木質素等有機物含量為33%;添加黑液榦粉能改善PVC/CPE彈性體複閤材料的力學性能,噹黑液榦粉含量為30 phr時,拉伸彊度保持不變,斷裂伸長率提高瞭8%,撕裂彊度提高瞭5%;採用硬脂痠處理的黑液榦粉,其用量為30 phr時,複閤材料綜閤性能較佳,其拉伸彊度提高瞭7%,斷裂伸長率提高瞭12%,撕裂彊度提高瞭18%;黑液榦粉含量30 phr時,PVC/CPE彈性體複閤材料熱降解溫度提高瞭5℃:添加黑液榦粉的複閤材料,在熱氧老化後拉伸彊度和邵爾A型硬度增加,斷裂伸長率稍有下降.
이조지흑액경류산중화처리탈수후적흑액간분위전료,채용용융공혼법제비료취록을희(PVC)/록화취을희(CPE)/흑액간분열소성탄성체복합재료.이용FTIR화TGA측시료흑액간분적결구화열성능;이용미공전자만능시험궤、TGA연구료흑액간분함량대탄성체복합재료적역학성능、열강해성능화노화성능적영향.결과표명:흑액간분중목질소등유궤물함량위33%;첨가흑액간분능개선PVC/CPE탄성체복합재료적역학성능,당흑액간분함량위30 phr시,랍신강도보지불변,단렬신장솔제고료8%,시렬강도제고료5%;채용경지산처리적흑액간분,기용량위30 phr시,복합재료종합성능교가,기랍신강도제고료7%,단렬신장솔제고료12%,시렬강도제고료18%;흑액간분함량30 phr시,PVC/CPE탄성체복합재료열강해온도제고료5℃:첨가흑액간분적복합재료,재열양노화후랍신강도화소이A형경도증가,단렬신장솔초유하강.