光子学报
光子學報
광자학보
ACTA PHOTONICA SINICA
2012年
2期
154-158
,共5页
王恺%冯丽爽%杨德伟%任小元%李鹏
王愷%馮麗爽%楊德偉%任小元%李鵬
왕개%풍려상%양덕위%임소원%리붕
光子晶体%孔状三角晶格%六边形环行腔%能带结构%透过率%光刻
光子晶體%孔狀三角晶格%六邊形環行腔%能帶結構%透過率%光刻
광자정체%공상삼각정격%륙변형배행강%능대결구%투과솔%광각
Photonic crystal%Triangular lattice holes%Hexagonal ring resonant%Band structure%Transmission rate%Photolithography
通过平面波展开法研究了三角孔状光子晶体晶格的能带结构,并考虑了该过程的辐射损耗.用时域有限差分的方法模拟计算了对应六边形环行腔结构的光谱透射特性,得出优化的晶格周期和占空比.在C波段上,优化的结构达到了98.8%的光学选择比和32.9 nm的半高全宽.用光刻和反应离子刻蚀的方法对样片的加工过程进行了尝试并给出加工参量.搭建相应的系统测试了样片的光谱性能,结果表明:实际样片孔状的样片较之柱状样片更为稳定,而基于环行谐振腔的结构在未来有应用于滤波器、波分复用系统、微陀螺等领域.
通過平麵波展開法研究瞭三角孔狀光子晶體晶格的能帶結構,併攷慮瞭該過程的輻射損耗.用時域有限差分的方法模擬計算瞭對應六邊形環行腔結構的光譜透射特性,得齣優化的晶格週期和佔空比.在C波段上,優化的結構達到瞭98.8%的光學選擇比和32.9 nm的半高全寬.用光刻和反應離子刻蝕的方法對樣片的加工過程進行瞭嘗試併給齣加工參量.搭建相應的繫統測試瞭樣片的光譜性能,結果錶明:實際樣片孔狀的樣片較之柱狀樣片更為穩定,而基于環行諧振腔的結構在未來有應用于濾波器、波分複用繫統、微陀螺等領域.
통과평면파전개법연구료삼각공상광자정체정격적능대결구,병고필료해과정적복사손모.용시역유한차분적방법모의계산료대응륙변형배행강결구적광보투사특성,득출우화적정격주기화점공비.재C파단상,우화적결구체도료98.8%적광학선택비화32.9 nm적반고전관.용광각화반응리자각식적방법대양편적가공과정진행료상시병급출가공삼량.탑건상응적계통측시료양편적광보성능,결과표명:실제양편공상적양편교지주상양편경위은정,이기우배행해진강적결구재미래유응용우려파기、파분복용계통、미타라등영역.
The band structures of triangular hole lattice photonic crystal are studied via plane wave expansion method,with radiation loss considered.The spectrum transmission characters of the designed structure are investigated through simulation of finite difference time-domain method (FDTD) for hexagonal ring resonant,and the parameters of lattice period and radius of the lattice hole are optimized.The drop efficiency rate of 98.8% and FWHM of 32.9 nm are reached through optimization of the designing in C-band.The samples are tentative fabricated through photolithography and reactive ion etching and the parameters are given. The transmission spectrum is measured and the reasons of differences from the theoretical result are analyzed.The schemes of slab based on ring resonant holes show a more stable character than the rod ones,and have potential future for filters,WDM devices and micro gyroscope.