煤矿机械
煤礦機械
매광궤계
COAL MINE MACHINERY
2012年
4期
34-35
,共2页
双端面磨削%工作台%运动学仿真
雙耑麵磨削%工作檯%運動學倣真
쌍단면마삭%공작태%운동학방진
针对硅片双端面磨削工作台与砂轮干涉的问题,设计了一种新的工作台,不仅可以消除工作台与砂轮的干涉,还可以实现旋转的功能,为了验证工作台结构的可行性,采用ADAMS仿真软件对机构进行了运动学仿真,得到了工作台在工作过程中的角速度曲线,并对影响工作台平稳性的参数进行了对比研究,结果表明,并非驱动角速度越低系统越稳定,而是系统参数之间存在最优的匹配值.
針對硅片雙耑麵磨削工作檯與砂輪榦涉的問題,設計瞭一種新的工作檯,不僅可以消除工作檯與砂輪的榦涉,還可以實現鏇轉的功能,為瞭驗證工作檯結構的可行性,採用ADAMS倣真軟件對機構進行瞭運動學倣真,得到瞭工作檯在工作過程中的角速度麯線,併對影響工作檯平穩性的參數進行瞭對比研究,結果錶明,併非驅動角速度越低繫統越穩定,而是繫統參數之間存在最優的匹配值.
침대규편쌍단면마삭공작태여사륜간섭적문제,설계료일충신적공작태,불부가이소제공작태여사륜적간섭,환가이실현선전적공능,위료험증공작태결구적가행성,채용ADAMS방진연건대궤구진행료운동학방진,득도료공작태재공작과정중적각속도곡선,병대영향공작태평은성적삼수진행료대비연구,결과표명,병비구동각속도월저계통월은정,이시계통삼수지간존재최우적필배치.