机床与液压
機床與液壓
궤상여액압
MACHINE TOOL & HYDRAULICS
2010年
22期
39-41
,共3页
曲面立体%熔丝沉积%层厚%精度分析
麯麵立體%鎔絲沉積%層厚%精度分析
곡면입체%용사침적%층후%정도분석
分析FDM快速成型制造曲面立体时的加工原理误差与残余加工量.以圆球曲面成型为例,对变层厚切片的加工精度和残余加工量及定层厚切片的加工精度和残余加工量进行理论分析与计算,并进行比较.结果表明:采用变层厚切片加工可以减少因加工原理误差造成的后处理加工量,保证加工精度和成型效率.
分析FDM快速成型製造麯麵立體時的加工原理誤差與殘餘加工量.以圓毬麯麵成型為例,對變層厚切片的加工精度和殘餘加工量及定層厚切片的加工精度和殘餘加工量進行理論分析與計算,併進行比較.結果錶明:採用變層厚切片加工可以減少因加工原理誤差造成的後處理加工量,保證加工精度和成型效率.
분석FDM쾌속성형제조곡면입체시적가공원리오차여잔여가공량.이원구곡면성형위례,대변층후절편적가공정도화잔여가공량급정층후절편적가공정도화잔여가공량진행이론분석여계산,병진행비교.결과표명:채용변층후절편가공가이감소인가공원리오차조성적후처리가공량,보증가공정도화성형효솔.