工程抗震与加固改造
工程抗震與加固改造
공정항진여가고개조
EARTHQUAKE RESISTANT ENGINEERING AND RETROFITTING
2009年
6期
74-78
,共5页
动力性能测试%摩擦阻尼%抗震加固%计算机仿真模拟%模态分析
動力性能測試%摩抆阻尼%抗震加固%計算機倣真模擬%模態分析
동력성능측시%마찰조니%항진가고%계산궤방진모의%모태분석
介绍了8度区某办公楼动力测试与利用摩擦阻尼进行抗震加固.首先对结构进行动力测试,然后,根据测得动力参数建立有限元模型对结构进行了三维分析,利用测试结果验证计算模型的正确性.最后,分析了结构加固后的抗震性能.分析结果表明,利用摩擦阻尼器对结构进行抗震加固可以改善结构的抗震性能.
介紹瞭8度區某辦公樓動力測試與利用摩抆阻尼進行抗震加固.首先對結構進行動力測試,然後,根據測得動力參數建立有限元模型對結構進行瞭三維分析,利用測試結果驗證計算模型的正確性.最後,分析瞭結構加固後的抗震性能.分析結果錶明,利用摩抆阻尼器對結構進行抗震加固可以改善結構的抗震性能.
개소료8도구모판공루동력측시여이용마찰조니진행항진가고.수선대결구진행동력측시,연후,근거측득동력삼수건립유한원모형대결구진행료삼유분석,이용측시결과험증계산모형적정학성.최후,분석료결구가고후적항진성능.분석결과표명,이용마찰조니기대결구진행항진가고가이개선결구적항진성능.