工程塑料应用
工程塑料應用
공정소료응용
ENGINEERING PLASTICS APPLICATION
2009年
12期
26-29
,共4页
孙宝寿%邓益民%陈哲%王利柱%刘军
孫寶壽%鄧益民%陳哲%王利柱%劉軍
손보수%산익민%진철%왕리주%류군
Taguchi试验设计%均匀试验设计%注塑%工艺参数优化
Taguchi試驗設計%均勻試驗設計%註塑%工藝參數優化
Taguchi시험설계%균균시험설계%주소%공예삼수우화
Taguchi Design of Experiment%Uniform Design of Experiment%Injection Molding%Optimization of Processing Parameters
基于Taguchi试验设计和均匀试验设计(UDE)方法,应用Moldflow对注塑过程进行模拟,对模拟结果分析处理,优化注塑工艺参数,并分析比较了Taguchi试验设计和UDE方法应用于注塑工艺优化的特点.结果表明,Taguchi试验设计和UDE均能满足注塑工艺优化的要求,但对多因素多水平试验,UDE方法试验次数较少,效率较高,优化结果较理想.
基于Taguchi試驗設計和均勻試驗設計(UDE)方法,應用Moldflow對註塑過程進行模擬,對模擬結果分析處理,優化註塑工藝參數,併分析比較瞭Taguchi試驗設計和UDE方法應用于註塑工藝優化的特點.結果錶明,Taguchi試驗設計和UDE均能滿足註塑工藝優化的要求,但對多因素多水平試驗,UDE方法試驗次數較少,效率較高,優化結果較理想.
기우Taguchi시험설계화균균시험설계(UDE)방법,응용Moldflow대주소과정진행모의,대모의결과분석처리,우화주소공예삼수,병분석비교료Taguchi시험설계화UDE방법응용우주소공예우화적특점.결과표명,Taguchi시험설계화UDE균능만족주소공예우화적요구,단대다인소다수평시험,UDE방법시험차수교소,효솔교고,우화결과교이상.
Injection molding was simulated in Moldflow based on Taguchi and Uniform Design of Experiment. The simulating result was analyzed and injection process parameters were optimized, and characteristics of optimization of process parameters based on Taguchi Design of Experiment and Uniform Design of Experiment were compared. The result indicated that both Taguchi and Uniform Design of Experiment were satisfy for optimization of injection process parameters, and Uniform Design of Experiment was more efficiency and ideal on many factors and many levels experiment.
