石化技术与应用
石化技術與應用
석화기술여응용
PETROCHEMICAL TECHNOLOGY & APPLICATION
2001年
1期
15-17
,共3页
聚α-烯烃%降凝剂%侧链结 构%降凝效果%适应性
聚α-烯烴%降凝劑%側鏈結 構%降凝效果%適應性
취α-희경%강응제%측련결 구%강응효과%괄응성
以皂蜡(含油量<5%)裂解的α-烯烃为原 料,考察了烷基侧链平均碳原子数不同的聚α -烯烃降凝剂在不同性质基础油中的降凝效果以及烷基侧链碳原子数分布不同的聚α-烯烃降 凝剂在不同性质基础油中的适应性,工业实验结果表明:选择碳 原子数分布在C7-C20的宽馏分α-烯烃为原料,所得的聚α-烯烃降凝剂烷 基侧链平均碳原子数在11.3左右时,可使各种不同性质的轻质基础油的凝固点降低25~32 ℃;烷基侧链平均碳原子数在11.7左右时,可使中间基不同性质的重质基础油的凝固点降低 15~20 ℃,使石蜡基不同性质的重质基础油的凝固点降低10~15 ℃。
以皂蠟(含油量<5%)裂解的α-烯烴為原 料,攷察瞭烷基側鏈平均碳原子數不同的聚α -烯烴降凝劑在不同性質基礎油中的降凝效果以及烷基側鏈碳原子數分佈不同的聚α-烯烴降 凝劑在不同性質基礎油中的適應性,工業實驗結果錶明:選擇碳 原子數分佈在C7-C20的寬餾分α-烯烴為原料,所得的聚α-烯烴降凝劑烷 基側鏈平均碳原子數在11.3左右時,可使各種不同性質的輕質基礎油的凝固點降低25~32 ℃;烷基側鏈平均碳原子數在11.7左右時,可使中間基不同性質的重質基礎油的凝固點降低 15~20 ℃,使石蠟基不同性質的重質基礎油的凝固點降低10~15 ℃。
이조사(함유량<5%)렬해적α-희경위원 료,고찰료완기측련평균탄원자수불동적취α -희경강응제재불동성질기출유중적강응효과이급완기측련탄원자수분포불동적취α-희경강 응제재불동성질기출유중적괄응성,공업실험결과표명:선택탄 원자수분포재C7-C20적관류분α-희경위원료,소득적취α-희경강응제완 기측련평균탄원자수재11.3좌우시,가사각충불동성질적경질기출유적응고점강저25~32 ℃;완기측련평균탄원자수재11.7좌우시,가사중간기불동성질적중질기출유적응고점강저 15~20 ℃,사석사기불동성질적중질기출유적응고점강저10~15 ℃。
The relationship between different alkyl side chain avera ge carbon numb ers of poly-α-olefine pour point depressant and the pour point depression effec t,and the influence of pour-point depressant with different alkyl side chain car bon distribution on the suitability of base oil were studied by using wax cracki ng α-olefine was selected at C7-C20,the qlkyl side chain average carbon numbers of poly-α-olefine pour point depressant were about 11.3,the pour point of light base oil decreased by 25~32 ℃,when the alkyl side chain ave rage carbon numbers were about 11.7,the pour point of heavy oil with middle base decreased by 15~20 ℃,and the pour point of heavy oil with paraffin base de crease by 10~15 ℃.