模具工业
模具工業
모구공업
DIE & MOUID INDUSTRY
2010年
1期
26-31
,共6页
夏琴香%王映品%王甲子%林业海%吴振邦
夏琴香%王映品%王甲子%林業海%吳振邦
하금향%왕영품%왕갑자%임업해%오진방
多楔带轮%旋压%预成形%工艺参数%腰鼓成形
多楔帶輪%鏇壓%預成形%工藝參數%腰鼓成形
다설대륜%선압%예성형%공예삼수%요고성형
用腰鼓件成形质量作为预成形工艺参数衡量指标,采用有限元软件MSC.Marc对多楔带轮预成形及腰鼓成形进行了数值模拟,探讨了预成形工艺参数对腰鼓成形的影响,并进行了试验验证.结果表明.预成形时下模端面摩擦属有利摩擦;旋轮底面与下模间隙对最终工件的底部及口部尺寸具有较大影响;旋轮沿径向施加给工件的压下量对腰鼓件质量影响较大.
用腰鼓件成形質量作為預成形工藝參數衡量指標,採用有限元軟件MSC.Marc對多楔帶輪預成形及腰鼓成形進行瞭數值模擬,探討瞭預成形工藝參數對腰鼓成形的影響,併進行瞭試驗驗證.結果錶明.預成形時下模耑麵摩抆屬有利摩抆;鏇輪底麵與下模間隙對最終工件的底部及口部呎吋具有較大影響;鏇輪沿徑嚮施加給工件的壓下量對腰鼓件質量影響較大.
용요고건성형질량작위예성형공예삼수형량지표,채용유한원연건MSC.Marc대다설대륜예성형급요고성형진행료수치모의,탐토료예성형공예삼수대요고성형적영향,병진행료시험험증.결과표명.예성형시하모단면마찰속유리마찰;선륜저면여하모간극대최종공건적저부급구부척촌구유교대영향;선륜연경향시가급공건적압하량대요고건질량영향교대.