红外与激光工程
紅外與激光工程
홍외여격광공정
INFRARED AND LASER ENGINEERING
2010年
2期
279-284
,共6页
黄林盛%张军%陈哲%陈少英
黃林盛%張軍%陳哲%陳少英
황림성%장군%진철%진소영
定轴%保偏光纤%侧视成像%光强分布%仿真
定軸%保偏光纖%側視成像%光彊分佈%倣真
정축%보편광섬%측시성상%광강분포%방진
Azimuthal alignment%Polarization maintaining fiber%Side-view imaging%Light intensity distribution%Simulation
根据保偏光纤侧视成像定轴原理,应用光线追迹方法,分析了保偏光纤侧视成像定轴过程,模拟考察了熊猫型保偏光纤侧视成像的光强分布与偏振轴方位角及物平面位置的关系.对比仿真结果和实验观测结果,对五指型光强分布特征值判断法进行了改进.比较了透镜效应侧视成像的不同定轴方法,发现改进的五指型光强分布特征值判断法的特征值在90°位置附近具有更高的定轴精度,更易于实现保偏光纤偏振主轴的定位.这种方法适用于制作保偏光纤耦合器和保偏光纤偏振器时,在偏振主轴0°或90°方位角时的高精度定轴.
根據保偏光纖側視成像定軸原理,應用光線追跡方法,分析瞭保偏光纖側視成像定軸過程,模擬攷察瞭熊貓型保偏光纖側視成像的光彊分佈與偏振軸方位角及物平麵位置的關繫.對比倣真結果和實驗觀測結果,對五指型光彊分佈特徵值判斷法進行瞭改進.比較瞭透鏡效應側視成像的不同定軸方法,髮現改進的五指型光彊分佈特徵值判斷法的特徵值在90°位置附近具有更高的定軸精度,更易于實現保偏光纖偏振主軸的定位.這種方法適用于製作保偏光纖耦閤器和保偏光纖偏振器時,在偏振主軸0°或90°方位角時的高精度定軸.
근거보편광섬측시성상정축원리,응용광선추적방법,분석료보편광섬측시성상정축과정,모의고찰료웅묘형보편광섬측시성상적광강분포여편진축방위각급물평면위치적관계.대비방진결과화실험관측결과,대오지형광강분포특정치판단법진행료개진.비교료투경효응측시성상적불동정축방법,발현개진적오지형광강분포특정치판단법적특정치재90°위치부근구유경고적정축정도,경역우실현보편광섬편진주축적정위.저충방법괄용우제작보편광섬우합기화보편광섬편진기시,재편진주축0°혹90°방위각시적고정도정축.
According to the principle of side-view imaging based on azimuth aligning of polarization maintaining fiber(PMF),the process of azimuth aligning was analyzed by using ray-tracing method,and the correlations were simulated among the side-view imaging light intensity distribution of the"PANDA"PMF,the azimuth angle of its principal polarization axis and position of object plane.By analyzing the results of simulation and experiments,the method of characteristic judgment in five-finger profile was modified.In comparison with the other azimuth aligning methods,the modified method shows more accurate alignment at the azimuth angle of 90.,and it is apt to achieve azimuth aligning of the PMF.The modified method can be used for the fabrication of the PMF coupler and polarizer where the high accurate azimuth aligning of polarization axis at 0.and 90.are required.