制造技术与机床
製造技術與機床
제조기술여궤상
MANUFACTURING TECHNOLOGY & MACHINE TOOL
2011年
10期
45-48
,共4页
结合面%参数识别%Levy法%验证方法
結閤麵%參數識彆%Levy法%驗證方法
결합면%삼수식별%Levy법%험증방법
对Levy法进行了改进,通过对阻尼比的迭代实现结合面动态特性参数的识别.实验表明,该方法对刚度和阻尼比都有较高的识别精度,其中对阻尼比的精确识别是该方法最大的优点.同时研究了基于ANSYS的结合面动态特性参数的验证方法,并通过将改进的Levy法识别得到的参数代入到ANSYS验证模型中,计算得到的结合面固有频率与实测频率误差小于6%,峰值误差为50%左右,说明了识别参数的有效性以及验证方法的可靠性.
對Levy法進行瞭改進,通過對阻尼比的迭代實現結閤麵動態特性參數的識彆.實驗錶明,該方法對剛度和阻尼比都有較高的識彆精度,其中對阻尼比的精確識彆是該方法最大的優點.同時研究瞭基于ANSYS的結閤麵動態特性參數的驗證方法,併通過將改進的Levy法識彆得到的參數代入到ANSYS驗證模型中,計算得到的結閤麵固有頻率與實測頻率誤差小于6%,峰值誤差為50%左右,說明瞭識彆參數的有效性以及驗證方法的可靠性.
대Levy법진행료개진,통과대조니비적질대실현결합면동태특성삼수적식별.실험표명,해방법대강도화조니비도유교고적식별정도,기중대조니비적정학식별시해방법최대적우점.동시연구료기우ANSYS적결합면동태특성삼수적험증방법,병통과장개진적Levy법식별득도적삼수대입도ANSYS험증모형중,계산득도적결합면고유빈솔여실측빈솔오차소우6%,봉치오차위50%좌우,설명료식별삼수적유효성이급험증방법적가고성.