冶金分析
冶金分析
야금분석
METALLURGICAL ANALYSIS
2009年
6期
47-49
,共3页
催化光度法%镍%双波长%双指示剂%吖啶红%靛蓝胭脂红%高碘酸钾
催化光度法%鎳%雙波長%雙指示劑%吖啶紅%靛藍胭脂紅%高碘痠鉀
최화광도법%얼%쌍파장%쌍지시제%아정홍%전람연지홍%고전산갑
研究了在氨水介质中,痕量镍(Ⅱ)催化高碘酸钾氧化吖啶红和靛蓝胭脂红褪色的指示反应,通过测量530 nm和610 nm处催化反应体系和非催化反应体系吸光度的变化,建立了双波长双指示剂催化动力学光度法测定痕量镍的新方法.在最佳实验条件下,镍的质量浓度在0~0.04μg/mL范围内与△A存在线性关系(△A=△A530+△A610),线性方程为△A=17.10pNi2+(μg/mL)-0.001 1,r=0.997 2,方法检出限为0.061μg/L.该方法用于合金中痕量镍的测定,与标准样品含量基本一致.
研究瞭在氨水介質中,痕量鎳(Ⅱ)催化高碘痠鉀氧化吖啶紅和靛藍胭脂紅褪色的指示反應,通過測量530 nm和610 nm處催化反應體繫和非催化反應體繫吸光度的變化,建立瞭雙波長雙指示劑催化動力學光度法測定痕量鎳的新方法.在最佳實驗條件下,鎳的質量濃度在0~0.04μg/mL範圍內與△A存在線性關繫(△A=△A530+△A610),線性方程為△A=17.10pNi2+(μg/mL)-0.001 1,r=0.997 2,方法檢齣限為0.061μg/L.該方法用于閤金中痕量鎳的測定,與標準樣品含量基本一緻.
연구료재안수개질중,흔량얼(Ⅱ)최화고전산갑양화아정홍화전람연지홍퇴색적지시반응,통과측량530 nm화610 nm처최화반응체계화비최화반응체계흡광도적변화,건립료쌍파장쌍지시제최화동역학광도법측정흔량얼적신방법.재최가실험조건하,얼적질량농도재0~0.04μg/mL범위내여△A존재선성관계(△A=△A530+△A610),선성방정위△A=17.10pNi2+(μg/mL)-0.001 1,r=0.997 2,방법검출한위0.061μg/L.해방법용우합금중흔량얼적측정,여표준양품함량기본일치.