林业科技开发
林業科技開髮
임업과기개발
CHINA FORESTRY SCIENCE AND TECHNOLOGY
2012年
5期
31-34
,共4页
关明杰%崔海星%孙敏洋%蔡智勇%朱一辛
關明傑%崔海星%孫敏洋%蔡智勇%硃一辛
관명걸%최해성%손민양%채지용%주일신
仿生螺旋%竹纤维束%拉伸强度%拉伸弹性模量
倣生螺鏇%竹纖維束%拉伸彊度%拉伸彈性模量
방생라선%죽섬유속%랍신강도%랍신탄성모량
对几种不同仿生螺旋结构竹纤维束的纵向拉伸性能进行测试分析,结果表明:平行均布、单螺旋、双螺旋A、双螺旋B型竹纤维束的拉伸强度分别为11.5、51.7、52.2和56.1 MPa;螺旋结构能够消除纤维束中的强度薄弱点,改善纤维束中各根纤维的结合,同时纤维束各层螺旋角的逐渐变化也有利于拉伸强度的提高.单螺旋、双螺旋A、双螺旋B型竹纤维束的拉伸弹性模量分别为9 659、5 265和4 291 MPa,单螺旋竹纤维束的拉伸弹性模量优于双螺旋竹纤维束.宏观仿生螺旋结构提高了竹束的拉伸强度,却降低了弹性模量.
對幾種不同倣生螺鏇結構竹纖維束的縱嚮拉伸性能進行測試分析,結果錶明:平行均佈、單螺鏇、雙螺鏇A、雙螺鏇B型竹纖維束的拉伸彊度分彆為11.5、51.7、52.2和56.1 MPa;螺鏇結構能夠消除纖維束中的彊度薄弱點,改善纖維束中各根纖維的結閤,同時纖維束各層螺鏇角的逐漸變化也有利于拉伸彊度的提高.單螺鏇、雙螺鏇A、雙螺鏇B型竹纖維束的拉伸彈性模量分彆為9 659、5 265和4 291 MPa,單螺鏇竹纖維束的拉伸彈性模量優于雙螺鏇竹纖維束.宏觀倣生螺鏇結構提高瞭竹束的拉伸彊度,卻降低瞭彈性模量.
대궤충불동방생라선결구죽섬유속적종향랍신성능진행측시분석,결과표명:평행균포、단라선、쌍라선A、쌍라선B형죽섬유속적랍신강도분별위11.5、51.7、52.2화56.1 MPa;라선결구능구소제섬유속중적강도박약점,개선섬유속중각근섬유적결합,동시섬유속각층라선각적축점변화야유리우랍신강도적제고.단라선、쌍라선A、쌍라선B형죽섬유속적랍신탄성모량분별위9 659、5 265화4 291 MPa,단라선죽섬유속적랍신탄성모량우우쌍라선죽섬유속.굉관방생라선결구제고료죽속적랍신강도,각강저료탄성모량.