宇航材料工艺
宇航材料工藝
우항재료공예
AEROSPACE MATERIALS & TECHNOLOGY
2010年
6期
49-52
,共4页
石墨纤维%分步热处理%拉伸强度%Raman光谱%皮芯结构
石墨纖維%分步熱處理%拉伸彊度%Raman光譜%皮芯結構
석묵섬유%분보열처리%랍신강도%Raman광보%피심결구
研究了分步热处理对石墨纤维力学性能及微观结构的影响,并采用Raman光谱分析了石墨纤维的皮芯结构程度.结果发现:在相同处理条件下,分步热处理有利于石墨纤维拉伸强度和体密度的提高,而其对弹性模量的影响则较小.分步热处理所得石墨纤维的表面石墨化程度较低,内部石墨化程度较高,其皮芯结构因子较大,说明其均质性更好一些.因此,分步热处理有利于提高石墨纤维的致密性和均质性,从而提高其拉伸强度.
研究瞭分步熱處理對石墨纖維力學性能及微觀結構的影響,併採用Raman光譜分析瞭石墨纖維的皮芯結構程度.結果髮現:在相同處理條件下,分步熱處理有利于石墨纖維拉伸彊度和體密度的提高,而其對彈性模量的影響則較小.分步熱處理所得石墨纖維的錶麵石墨化程度較低,內部石墨化程度較高,其皮芯結構因子較大,說明其均質性更好一些.因此,分步熱處理有利于提高石墨纖維的緻密性和均質性,從而提高其拉伸彊度.
연구료분보열처리대석묵섬유역학성능급미관결구적영향,병채용Raman광보분석료석묵섬유적피심결구정도.결과발현:재상동처리조건하,분보열처리유리우석묵섬유랍신강도화체밀도적제고,이기대탄성모량적영향칙교소.분보열처리소득석묵섬유적표면석묵화정도교저,내부석묵화정도교고,기피심결구인자교대,설명기균질성경호일사.인차,분보열처리유리우제고석묵섬유적치밀성화균질성,종이제고기랍신강도.