中国有色金属学报(英文版)
中國有色金屬學報(英文版)
중국유색금속학보(영문판)
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
2011年
7期
1680-1684
,共5页
陈乔平%闫红杰%葛世恒%周孑民
陳喬平%閆紅傑%葛世恆%週孑民
진교평%염홍걸%갈세항%주혈민
模型试验%数值计算%多相流%种分
模型試驗%數值計算%多相流%種分
모형시험%수치계산%다상류%충분
model experiment%numerical simulation%multiphase flow%seed precipitation
为了验证空气搅拌式种分槽流场数学模型的可靠性,设计了空气搅拌式种分槽的模型实验台架,实验台架按照原始比例进行缩小.采用有色示踪剂与KCl示踪剂来研究种分槽内的流体流动过程.在种分槽流场的数学模型中增加虚拟示踪剂模块,建立虚拟示踪剂跟踪计算的算法.对实验结果与数值计算结果进行了比较.结果表明:示踪剂进入种分槽后从翻料管流出的时间实验结果为40 s,数值计算结果为42 s;数值计算所得有色示踪剂在种分槽内的扩散过程与停留时间分布与实验结果吻合良好.实验结果表明:空气搅拌式种分槽的数学模型是可靠的,可以用于预测分析种分槽内流体流动状况.
為瞭驗證空氣攪拌式種分槽流場數學模型的可靠性,設計瞭空氣攪拌式種分槽的模型實驗檯架,實驗檯架按照原始比例進行縮小.採用有色示蹤劑與KCl示蹤劑來研究種分槽內的流體流動過程.在種分槽流場的數學模型中增加虛擬示蹤劑模塊,建立虛擬示蹤劑跟蹤計算的算法.對實驗結果與數值計算結果進行瞭比較.結果錶明:示蹤劑進入種分槽後從翻料管流齣的時間實驗結果為40 s,數值計算結果為42 s;數值計算所得有色示蹤劑在種分槽內的擴散過程與停留時間分佈與實驗結果吻閤良好.實驗結果錶明:空氣攪拌式種分槽的數學模型是可靠的,可以用于預測分析種分槽內流體流動狀況.
위료험증공기교반식충분조류장수학모형적가고성,설계료공기교반식충분조적모형실험태가,실험태가안조원시비례진행축소.채용유색시종제여KCl시종제래연구충분조내적류체류동과정.재충분조류장적수학모형중증가허의시종제모괴,건립허의시종제근종계산적산법.대실험결과여수치계산결과진행료비교.결과표명:시종제진입충분조후종번료관류출적시간실험결과위40 s,수치계산결과위42 s;수치계산소득유색시종제재충분조내적확산과정여정류시간분포여실험결과문합량호.실험결과표명:공기교반식충분조적수학모형시가고적,가이용우예측분석충분조내류체류동상황.
In order to check the validity of the mathematical model for analyzing the flow field in the air-agitated seed precipitation tank,a scaled down experimental apparatus was designed and the colored tracer and KCI tracer were added in the apparatus to follow the real flow line.Virtue tracers were considered in the mathematical model and the algorithm of tracers was built.The comparison of the results between the experiment and numerical calculation shows that the time of the tracer flows out of stirring tube are 40 s in the experiment and 42 s in numerical calculated result.The transient diffusion process and the solution residence time of the numerical calculation are in good agreement with the experimental results,which indicates that the mathematical model is reliable and can be used to predict the flow field of the air-agitated seed precipitation tank.