染料与染色
染料與染色
염료여염색
DYESTUFF INDUSTRY
2011年
1期
33-34,52
,共3页
朱俊伟%李翠萍%方虹天%陈晓娇
硃俊偉%李翠萍%方虹天%陳曉嬌
주준위%리취평%방홍천%진효교
苎麻%超声波染色%上染百分率
苧痳%超聲波染色%上染百分率
저마%초성파염색%상염백분솔
本文主要介绍了用超声波染苎麻的染色工艺.通过对超声波染色工艺中染色温度、盐用量、碱用量、固色时间等因素进行优化实验,最终得出超声波染苎麻纤维的最佳工艺为:染色温度60℃,氯化钠15 g/L,碳酸钠15g/L,浴比1:40,固色时间为30分钟.最后超声波染苎麻纤维的最佳工艺与常规工艺对比得出,用超声波染色能提高活性染料对苎麻的上染率,同时减少了助剂的用量,从而节约了生产成本,做到节能减排.
本文主要介紹瞭用超聲波染苧痳的染色工藝.通過對超聲波染色工藝中染色溫度、鹽用量、堿用量、固色時間等因素進行優化實驗,最終得齣超聲波染苧痳纖維的最佳工藝為:染色溫度60℃,氯化鈉15 g/L,碳痠鈉15g/L,浴比1:40,固色時間為30分鐘.最後超聲波染苧痳纖維的最佳工藝與常規工藝對比得齣,用超聲波染色能提高活性染料對苧痳的上染率,同時減少瞭助劑的用量,從而節約瞭生產成本,做到節能減排.
본문주요개소료용초성파염저마적염색공예.통과대초성파염색공예중염색온도、염용량、감용량、고색시간등인소진행우화실험,최종득출초성파염저마섬유적최가공예위:염색온도60℃,록화납15 g/L,탄산납15g/L,욕비1:40,고색시간위30분종.최후초성파염저마섬유적최가공예여상규공예대비득출,용초성파염색능제고활성염료대저마적상염솔,동시감소료조제적용량,종이절약료생산성본,주도절능감배.