金属矿山
金屬礦山
금속광산
METAL MINE
2009年
1期
81-84
,共4页
李玉琼%陈建华%穆枭%魏宗武
李玉瓊%陳建華%穆梟%魏宗武
리옥경%진건화%목효%위종무
氧化锌%重选%浮选%脱泥方法
氧化鋅%重選%浮選%脫泥方法
양화자%중선%부선%탈니방법
针对云南普洱某含泥且含锌方解石的氧化锌矿,对原矿采取了直接浮选法、摇床重选处理后再浮选、磨矿后脱泥再浮选及磨矿前脱泥再浮选等不同的选别方法回收氧化锌.试验结果表明,对含泥量大的氧化锌矿采用直接浮选法,矿石难以选别;采用摇床处理后再浮选法,摇床过程锌损失较大,摇床作业回收率只有50.00%,导致锌总回收率只有40.50%;对原矿磨矿后脱泥处理后再浮选,锌的回收率较重选法提高了18.70个百分点;采用磨矿前脱泥后再浮选的选别流程,较之原矿磨矿后脱泥再浮选,锌品位及回收率分别提高了9.46个百分点和8.30个百分点.采用磨矿前脱泥的氧化锌浮选新工艺已经在工业上获得了成功应用,生产指标稳定,精矿锌品位达到37.21%,锌回收率达到64.97%.
針對雲南普洱某含泥且含鋅方解石的氧化鋅礦,對原礦採取瞭直接浮選法、搖床重選處理後再浮選、磨礦後脫泥再浮選及磨礦前脫泥再浮選等不同的選彆方法迴收氧化鋅.試驗結果錶明,對含泥量大的氧化鋅礦採用直接浮選法,礦石難以選彆;採用搖床處理後再浮選法,搖床過程鋅損失較大,搖床作業迴收率隻有50.00%,導緻鋅總迴收率隻有40.50%;對原礦磨礦後脫泥處理後再浮選,鋅的迴收率較重選法提高瞭18.70箇百分點;採用磨礦前脫泥後再浮選的選彆流程,較之原礦磨礦後脫泥再浮選,鋅品位及迴收率分彆提高瞭9.46箇百分點和8.30箇百分點.採用磨礦前脫泥的氧化鋅浮選新工藝已經在工業上穫得瞭成功應用,生產指標穩定,精礦鋅品位達到37.21%,鋅迴收率達到64.97%.
침대운남보이모함니차함자방해석적양화자광,대원광채취료직접부선법、요상중선처리후재부선、마광후탈니재부선급마광전탈니재부선등불동적선별방법회수양화자.시험결과표명,대함니량대적양화자광채용직접부선법,광석난이선별;채용요상처리후재부선법,요상과정자손실교대,요상작업회수솔지유50.00%,도치자총회수솔지유40.50%;대원광마광후탈니처리후재부선,자적회수솔교중선법제고료18.70개백분점;채용마광전탈니후재부선적선별류정,교지원광마광후탈니재부선,자품위급회수솔분별제고료9.46개백분점화8.30개백분점.채용마광전탈니적양화자부선신공예이경재공업상획득료성공응용,생산지표은정,정광자품위체도37.21%,자회수솔체도64.97%.