石油钻采工艺
石油鑽採工藝
석유찬채공예
OIL DRILLING & PRODUCTION TECHNOLOGY
2010年
2期
62-64
,共3页
张舒琴%李海涛%韩歧清%唐庆%吴杰生%刘琳
張舒琴%李海濤%韓歧清%唐慶%吳傑生%劉琳
장서금%리해도%한기청%당경%오걸생%류림
中心管采油%水平并%控水%流入剖面
中心管採油%水平併%控水%流入剖麵
중심관채유%수평병%공수%류입부면
stinger production%horizontal well%higher water cut%inflow profile%increasing oil and falling water
在前人提出的中心管完井控锥基础上,针对水平井高含水情况,扩展了中心管完井的思路,提出中心管采油的概念.根据线汇叠加、镜像反映以及质量守恒和动量原理推导得到中心管耦合模型,利用模型计算了实例的流入剖面,对比中心管施工前后流入剖面,通过方案优选给出中心管施工推荐方案.现场施工一个多月后,采油量上升,含水率下降,达到了明显的增油降水效果,同时证明了采用中心管来调节油井高含水期生产指标是可行的.
在前人提齣的中心管完井控錐基礎上,針對水平井高含水情況,擴展瞭中心管完井的思路,提齣中心管採油的概唸.根據線彙疊加、鏡像反映以及質量守恆和動量原理推導得到中心管耦閤模型,利用模型計算瞭實例的流入剖麵,對比中心管施工前後流入剖麵,通過方案優選給齣中心管施工推薦方案.現場施工一箇多月後,採油量上升,含水率下降,達到瞭明顯的增油降水效果,同時證明瞭採用中心管來調節油井高含水期生產指標是可行的.
재전인제출적중심관완정공추기출상,침대수평정고함수정황,확전료중심관완정적사로,제출중심관채유적개념.근거선회첩가、경상반영이급질량수항화동량원리추도득도중심관우합모형,이용모형계산료실례적류입부면,대비중심관시공전후류입부면,통과방안우선급출중심관시공추천방안.현장시공일개다월후,채유량상승,함수솔하강,체도료명현적증유강수효과,동시증명료채용중심관래조절유정고함수기생산지표시가행적.
This study suggests the concept of Stinger Prouduction which can solve higher water cut in horizontal wells based on Stinger Completion. Stinger coupling model can be achieved by liner superimpose and reflection mirror principle and mass conversa-tion and momentum principle. Example's influx profile is computed by the model. So you can tell the influx profile difference between before stinger construction and after. The final stigner construction plan can be got through optimization. After about one month, oil production increased and water cut declined which suggests that it's possible to adjust production quota at the time of higer water cut by using stinger.