中国有色金属学报(英文版)
中國有色金屬學報(英文版)
중국유색금속학보(영문판)
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
2012年
3期
627-633
,共7页
邹俭鹏%WANG Ri-zhi
鄒儉鵬%WANG Ri-zhi
추검붕%WANG Ri-zhi
TiO2纳米管%阳极氧化%界面剪切强度%裂纹%能量释放率
TiO2納米管%暘極氧化%界麵剪切彊度%裂紋%能量釋放率
TiO2납미관%양겁양화%계면전절강도%렬문%능량석방솔
TiO2 nanotube%anodization%interfacial shear strength%cracking%energy release rate
通过阳极氧化法在Ti基体上垂直定向生长TiO2纳米管,其直径为60-80 nm,长度为4μm.采用基体应变测试方法研究TiO2纳米管薄膜裂纹起源、扩展与饱和的情况.结果表明:退火可明显改善TiO2纳米管薄膜/Ti基体界面状况;随着拉伸应变的增加,裂纹扩展迅速加快,在很小的应变范围内达到饱和;TiO2纳米管薄膜室温样、250℃退火样和400℃退火样的界面剪切强度估算值分别为163.3、370.2和684.5 MPa,临界能量释放率分别为49.6、102.6和392.7 J/m2,断裂韧性分别为0.996、1.433和2.803 MPa·m1/2.TiO2纳米管薄膜的界面结合机制为化学键结合.
通過暘極氧化法在Ti基體上垂直定嚮生長TiO2納米管,其直徑為60-80 nm,長度為4μm.採用基體應變測試方法研究TiO2納米管薄膜裂紋起源、擴展與飽和的情況.結果錶明:退火可明顯改善TiO2納米管薄膜/Ti基體界麵狀況;隨著拉伸應變的增加,裂紋擴展迅速加快,在很小的應變範圍內達到飽和;TiO2納米管薄膜室溫樣、250℃退火樣和400℃退火樣的界麵剪切彊度估算值分彆為163.3、370.2和684.5 MPa,臨界能量釋放率分彆為49.6、102.6和392.7 J/m2,斷裂韌性分彆為0.996、1.433和2.803 MPa·m1/2.TiO2納米管薄膜的界麵結閤機製為化學鍵結閤.
통과양겁양화법재Ti기체상수직정향생장TiO2납미관,기직경위60-80 nm,장도위4μm.채용기체응변측시방법연구TiO2납미관박막렬문기원、확전여포화적정황.결과표명:퇴화가명현개선TiO2납미관박막/Ti기체계면상황;수착랍신응변적증가,렬문확전신속가쾌,재흔소적응변범위내체도포화;TiO2납미관박막실온양、250℃퇴화양화400℃퇴화양적계면전절강도고산치분별위163.3、370.2화684.5 MPa,림계능량석방솔분별위49.6、102.6화392.7 J/m2,단렬인성분별위0.996、1.433화2.803 MPa·m1/2.TiO2납미관박막적계면결합궤제위화학건결합.
Vertically orientated TiO2 nanotube array with diameters ranging from 60 up to 80 nm and length of 4 μm was grown on titanium by anodization.Crack initiation,propagation and saturation were studied using the substrate straining test.The results show that annealing obviously modifies the interfaces.With the increase of tensile strain,cracks in TiO2 nanotube films propagate rapidly and reach the saturation within a narrow strain gap.Interracial shear strengths of TiO2 nanotube films without annealing,with 250 ℃annealing and with 400 ℃ annealing can be estimated as 163.3,370.2 and 684.5 MPa,respectively.The critical energy release rates of TiO2 nanotube films are calculated as 49.6,102.6 and 392.7 J/m2,respectively.The fracture toughnesses of TiO2 nanotube films are estimated as 0.996,1.433 and 2.803 MPa·m1/2,respectively.The interfacial bonding mechanism of TiO2 nanotube film is chemical bonding.