南京理工大学学报(自然科学版)
南京理工大學學報(自然科學版)
남경리공대학학보(자연과학판)
JOURNAL OF NANJING UNIVERSITY OF SCIENCE AND TECHNOLOGY
2009年
6期
717-722
,共6页
薄壁%铣削%有限元法%模态分析%稳定性
薄壁%鐉削%有限元法%模態分析%穩定性
박벽%선삭%유한원법%모태분석%은정성
thin-walled components%milling%finite element method%modal analysis%stability
为预测薄壁件的铣削加工稳定性,采用有限元模态分析方法和试验模态分析方法,分别分析刀具子系统和工件子系统的动态特性.根据薄壁零件的振型模态,划分表示工件在加工过程中动态特性变化的不同加工阶段、选取能够在刀具切削位置激起振动位移的高阶动态频响模型作为预测切削稳定性的有效振型.对于薄壁零件的铣削加工,建立由刀具子系统和工件子系统相互作用的、考虑加工阶段并取决于有效振型的加工系统结构传递函数.稳定性预测结果与试验结果基本相符,证明系统传递函数的测定精度较高.
為預測薄壁件的鐉削加工穩定性,採用有限元模態分析方法和試驗模態分析方法,分彆分析刀具子繫統和工件子繫統的動態特性.根據薄壁零件的振型模態,劃分錶示工件在加工過程中動態特性變化的不同加工階段、選取能夠在刀具切削位置激起振動位移的高階動態頻響模型作為預測切削穩定性的有效振型.對于薄壁零件的鐉削加工,建立由刀具子繫統和工件子繫統相互作用的、攷慮加工階段併取決于有效振型的加工繫統結構傳遞函數.穩定性預測結果與試驗結果基本相符,證明繫統傳遞函數的測定精度較高.
위예측박벽건적선삭가공은정성,채용유한원모태분석방법화시험모태분석방법,분별분석도구자계통화공건자계통적동태특성.근거박벽령건적진형모태,화분표시공건재가공과정중동태특성변화적불동가공계단、선취능구재도구절삭위치격기진동위이적고계동태빈향모형작위예측절삭은정성적유효진형.대우박벽령건적선삭가공,건립유도구자계통화공건자계통상호작용적、고필가공계단병취결우유효진형적가공계통결구전체함수.은정성예측결과여시험결과기본상부,증명계통전체함수적측정정도교고.
To predict the stability of the thin-walled components milling, the dynamic characteristics of the spindle-tool set and the workpiece are analysed respectively by the finite element modal analysis method and the experimental modal analysis method. The flexible workpiece vibration modes are available for partitioning the distinct machining stages that denote the dynamic variation characteristics of the workpiece in the process and for selecting the high-order dynamic frequency modes that can produce the displacement at the tool-cutting position as the virtual vibration modes to predict the cutting stability. For the thin-walled components milling, a system structural transfer function is proposed, which consists of a sub-section that describes the interaction of the spindle-tool set model and the workpiece dynamics, considers the machining stages position, and depends on the virtual vibration modes. The stability prediction results are in good agreement of the experimental results. The high precision of the system transfer function is proved.