机械工程师
機械工程師
궤계공정사
MECHANICAL ENGINEER
2002年
6期
12-14
,共3页
深孔钻%超细长深孔%钛合金
深孔鑽%超細長深孔%鈦閤金
심공찬%초세장심공%태합금
针对直径为φ20 mm的超细长钛合金的深孔钻削,设计了加工工艺、切削刀具和切削参数,进行了试验研究.试验结果表明:改进深孔钻的结构,优化切削工艺和参数,可以加工出长径比为165的超细长钛合金深孔.
針對直徑為φ20 mm的超細長鈦閤金的深孔鑽削,設計瞭加工工藝、切削刀具和切削參數,進行瞭試驗研究.試驗結果錶明:改進深孔鑽的結構,優化切削工藝和參數,可以加工齣長徑比為165的超細長鈦閤金深孔.
침대직경위φ20 mm적초세장태합금적심공찬삭,설계료가공공예、절삭도구화절삭삼수,진행료시험연구.시험결과표명:개진심공찬적결구,우화절삭공예화삼수,가이가공출장경비위165적초세장태합금심공.