林业科学
林業科學
임업과학
SCIENTIA SILVAE SINICAE
2010年
10期
108-113
,共6页
邵卓平%童永耀%盛宏玉%牛忠荣%董宏敢
邵卓平%童永耀%盛宏玉%牛忠榮%董宏敢
소탁평%동영요%성굉옥%우충영%동굉감
木材断裂%有限元%应力场%开裂方向预测
木材斷裂%有限元%應力場%開裂方嚮預測
목재단렬%유한원%응력장%개렬방향예측
以鱼鳞云杉木材三点弯曲试件为例,应用ABAQUS有限元软件分析裂纹体与木材顺纹向倾角分别为90°,60°,30°,0°时的应力场,并采用"切向比正应力准则"对裂纹的启始开裂方向进行预测.结果表明:1)以裂尖为中心作径向平面,4种裂纹体试件的最大Mises应力所在的径向线均沿着木材的顺纹理方向;2)在除去裂尖奇异点以外的一个较大区域中,垂直裂纹表面的拉应力σY和平行裂纹表面的拉应力σX的比值σY/σX几乎是一个常数,在1~5之间;3)无论初始裂纹与木材顺纹向的夹角如何,其裂尖处的切向比正应力(R)均在顺纹方向上最大,理论预测和试验结果均表明裂纹将折向顺纹方向启裂.最后讨论木细胞间的低界面强度对木材的增韧作用.
以魚鱗雲杉木材三點彎麯試件為例,應用ABAQUS有限元軟件分析裂紋體與木材順紋嚮傾角分彆為90°,60°,30°,0°時的應力場,併採用"切嚮比正應力準則"對裂紋的啟始開裂方嚮進行預測.結果錶明:1)以裂尖為中心作徑嚮平麵,4種裂紋體試件的最大Mises應力所在的徑嚮線均沿著木材的順紋理方嚮;2)在除去裂尖奇異點以外的一箇較大區域中,垂直裂紋錶麵的拉應力σY和平行裂紋錶麵的拉應力σX的比值σY/σX幾乎是一箇常數,在1~5之間;3)無論初始裂紋與木材順紋嚮的夾角如何,其裂尖處的切嚮比正應力(R)均在順紋方嚮上最大,理論預測和試驗結果均錶明裂紋將摺嚮順紋方嚮啟裂.最後討論木細胞間的低界麵彊度對木材的增韌作用.
이어린운삼목재삼점만곡시건위례,응용ABAQUS유한원연건분석렬문체여목재순문향경각분별위90°,60°,30°,0°시적응력장,병채용"절향비정응력준칙"대렬문적계시개렬방향진행예측.결과표명:1)이렬첨위중심작경향평면,4충렬문체시건적최대Mises응력소재적경향선균연착목재적순문리방향;2)재제거렬첨기이점이외적일개교대구역중,수직렬문표면적랍응력σY화평행렬문표면적랍응력σX적비치σY/σX궤호시일개상수,재1~5지간;3)무론초시렬문여목재순문향적협각여하,기렬첨처적절향비정응력(R)균재순문방향상최대,이론예측화시험결과균표명렬문장절향순문방향계렬.최후토론목세포간적저계면강도대목재적증인작용.