仪器仪表用户
儀器儀錶用戶
의기의표용호
MAIN CONTENTS
2013年
4期
56-59
,共4页
主汽温系统%模糊控制%动态矩阵控制
主汽溫繫統%模糊控製%動態矩陣控製
주기온계통%모호공제%동태구진공제
main stream temperature system%Fuzzy Control%DMC
针对火电厂主汽温对象的时变性以及大迟延的特点,本文应用模糊-动态矩阵控制算法(Fuzzy-DMC),在原有动态矩阵控制器的基础上,引入模糊控制器。该模糊控制器用来校正实际对象与模型之间的输出偏差,有效降低了实际对象发生较大变化时模型与实际对象不匹配的影响,提高了动态矩阵控制的鲁棒性。将该方法应用到某600WM火电机组主汽温对象中进行仿真,仿真结果表明当主汽温对象发生较大变化时,系统仍能取得理想的控制效果,其性能明显优于常规PID以及动态矩阵控制器,是可行且有效的。
針對火電廠主汽溫對象的時變性以及大遲延的特點,本文應用模糊-動態矩陣控製算法(Fuzzy-DMC),在原有動態矩陣控製器的基礎上,引入模糊控製器。該模糊控製器用來校正實際對象與模型之間的輸齣偏差,有效降低瞭實際對象髮生較大變化時模型與實際對象不匹配的影響,提高瞭動態矩陣控製的魯棒性。將該方法應用到某600WM火電機組主汽溫對象中進行倣真,倣真結果錶明噹主汽溫對象髮生較大變化時,繫統仍能取得理想的控製效果,其性能明顯優于常規PID以及動態矩陣控製器,是可行且有效的。
침대화전엄주기온대상적시변성이급대지연적특점,본문응용모호-동태구진공제산법(Fuzzy-DMC),재원유동태구진공제기적기출상,인입모호공제기。해모호공제기용래교정실제대상여모형지간적수출편차,유효강저료실제대상발생교대변화시모형여실제대상불필배적영향,제고료동태구진공제적로봉성。장해방법응용도모600WM화전궤조주기온대상중진행방진,방진결과표명당주기온대상발생교대변화시,계통잉능취득이상적공제효과,기성능명현우우상규PID이급동태구진공제기,시가행차유효적。
The thermal power plant’s main stream temperature system has the characteristics of an uncertain system with large delay and time-varying,so this paper has applied an Fuzzy-dynamic matrix control (Fuzzy-DMC) algorithm.A fuzzy controller is introduced based on original dynamic matrix control.The fuzzy controller is used for correcting the output deviation between the actual object and the prediction model.The method has effectively reduced the impact of model mismatch when the actual object changes greatly.It has improved the robust performance.A simulation for a 600WM thermal power unit’s main stream temperature system using the presented method is carried out and the simulation demonstrates that when the object changes greatly,the system is able to achieve ideal control effect and the performance is better than conventional PID and dynamic matrix control er.It is feasible and effective.