强激光与粒子束
彊激光與粒子束
강격광여입자속
HIGH POWER LASER AND PARTICLEBEAMS
2006年
2期
277-280
,共4页
电子枪%热形变%分析%测试%速调管
電子鎗%熱形變%分析%測試%速調管
전자창%열형변%분석%측시%속조관
Electron gun%Thermal-deformation%Analysis%Test%Klystron
国产50 MW速调管需要脉冲功率为120 MW的电子枪,其阴极为皮尔斯型储备式阴极,扫描直径为85 mm.利用ANSYS 对该速调管电子枪的温度场分布及结构的热变形进行了模拟分析.对于电子枪复杂的内部结构形态以及能量转换方式,分析了热传导方式对温度场的影响.在此基础上进行了温度场与结构变形的耦合分析,利用EGUN对电子枪形变前后束流光学特性进行模拟分析,并对模拟结果与高功率测试结果进行了分析比较.
國產50 MW速調管需要脈遲功率為120 MW的電子鎗,其陰極為皮爾斯型儲備式陰極,掃描直徑為85 mm.利用ANSYS 對該速調管電子鎗的溫度場分佈及結構的熱變形進行瞭模擬分析.對于電子鎗複雜的內部結構形態以及能量轉換方式,分析瞭熱傳導方式對溫度場的影響.在此基礎上進行瞭溫度場與結構變形的耦閤分析,利用EGUN對電子鎗形變前後束流光學特性進行模擬分析,併對模擬結果與高功率測試結果進行瞭分析比較.
국산50 MW속조관수요맥충공솔위120 MW적전자창,기음겁위피이사형저비식음겁,소묘직경위85 mm.이용ANSYS 대해속조관전자창적온도장분포급결구적열변형진행료모의분석.대우전자창복잡적내부결구형태이급능량전환방식,분석료열전도방식대온도장적영향.재차기출상진행료온도장여결구변형적우합분석,이용EGUN대전자창형변전후속류광학특성진행모의분석,병대모의결과여고공솔측시결과진행료분석비교.
A 120 MW pulsed electron gun has been developed for 50 MW China-made klystron. It has a Pierce type dispenser cathode and it scans with a diameter of 85 mm. This paper describes the temperature field distribution in the gun and the gun deformation caused by this distribution by using ANSYS. According to the real complex structure and the energy conversion inside the electron gun, we took the thermal conduction as the main energy conversion form and got the temperature field. The coincidence between the temperature field and the structural deformation is also described in this paper. The beam optics simulated by EGUN with and without considering deformation is discussed, and the valuable results have been obtained. The high power test results and simulation results are analyzed and compared.