热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2010年
8期
42-44,48
,共4页
TRIP钢%卷取温度%等温处理%残余奥氏体%力学性能
TRIP鋼%捲取溫度%等溫處理%殘餘奧氏體%力學性能
TRIP강%권취온도%등온처리%잔여오씨체%역학성능
TRIP-aided steels%coiling temperature%austempering%retained austenite%mechanical properties
含钒TRIP钢热变形后在350~450℃等温处理30min,研究卷取温度对其显微组织和力学性能的影响.结果表明,随等温温度的升高,贝氏体、残余奥氏体的量以及残余奥氏体中碳浓度先增加后减少.断后伸长率、最大力非比例伸长率和应变硬化指数表现出与此类似的变化趋势.450℃等温处理时析出的渗碳体对延性和应变硬化指数有不利影响.热轧TRIP钢的卷取温度为400℃时将获得优良的综合力学性能.
含釩TRIP鋼熱變形後在350~450℃等溫處理30min,研究捲取溫度對其顯微組織和力學性能的影響.結果錶明,隨等溫溫度的升高,貝氏體、殘餘奧氏體的量以及殘餘奧氏體中碳濃度先增加後減少.斷後伸長率、最大力非比例伸長率和應變硬化指數錶現齣與此類似的變化趨勢.450℃等溫處理時析齣的滲碳體對延性和應變硬化指數有不利影響.熱軋TRIP鋼的捲取溫度為400℃時將穫得優良的綜閤力學性能.
함범TRIP강열변형후재350~450℃등온처리30min,연구권취온도대기현미조직화역학성능적영향.결과표명,수등온온도적승고,패씨체、잔여오씨체적량이급잔여오씨체중탄농도선증가후감소.단후신장솔、최대력비비례신장솔화응변경화지수표현출여차유사적변화추세.450℃등온처리시석출적삼탄체대연성화응변경화지수유불리영향.열알TRIP강적권취온도위400℃시장획득우량적종합역학성능.
Hot deformed vanadium bearing TRIP-aided steels were isothermally treated at 350~450 ℃ for 30 min in order to study the effects of coiling temperature on its microstructure and mechanical properties.The results show that,with the increase of holding temperature,the amount of bainite and retained austenite,the carbon concentration in retained austenite first increases and then decreases.Percentage elongation after fracture,percentage non-proportional elongation at maximun fore and strain hardening exponent exhibit a similar trend as above.Cementite which precipitates during isothermal treatment at 450 ℃ causes damages to both ductility and strain hardening exponent.The excellent combination of strength and ductility is obtained when hot rolling TRIP-aided steels are coiled at 400 ℃.