压力容器
壓力容器
압력용기
2009年
10期
5-9
,共5页
3.5Ni钢%两相区淬火%低温冲击韧性
3.5Ni鋼%兩相區淬火%低溫遲擊韌性
3.5Ni강%량상구쉬화%저온충격인성
针对3.5Ni厚钢板低温冲击韧性较低的问题,通过试验研究和生产实践,从理论和实践上探讨了两相区淬火对钢板低温冲击韧性的影响.通过调整热处理工艺,有效地提高了3.5Ni厚板低温冲击韧性,使之达到相对较高的水平.
針對3.5Ni厚鋼闆低溫遲擊韌性較低的問題,通過試驗研究和生產實踐,從理論和實踐上探討瞭兩相區淬火對鋼闆低溫遲擊韌性的影響.通過調整熱處理工藝,有效地提高瞭3.5Ni厚闆低溫遲擊韌性,使之達到相對較高的水平.
침대3.5Ni후강판저온충격인성교저적문제,통과시험연구화생산실천,종이론화실천상탐토료량상구쉬화대강판저온충격인성적영향.통과조정열처리공예,유효지제고료3.5Ni후판저온충격인성,사지체도상대교고적수평.