岩土力学
巖土力學
암토역학
ROCK AND SOIL MECHANICS
2011年
6期
1874-1880
,共7页
肖同强%柏建彪%王襄禹%陈勇%于洋
肖同彊%柏建彪%王襄禹%陳勇%于洋
초동강%백건표%왕양우%진용%우양
深部巷道%厚顶煤%大断面%破坏机制%层理面%斜拉锚索梁
深部巷道%厚頂煤%大斷麵%破壞機製%層理麵%斜拉錨索樑
심부항도%후정매%대단면%파배궤제%층리면%사랍묘색량
针对深部高地应力、大断面、厚顶煤巷道围岩控制难题,采用理论分析、数值计算等方法研究了其变形破坏机制及其控制技术.研究结果表明,深部大断面厚顶煤巷道顶煤塑性区呈"拱形"或上宽下窄的"倒梯形"形态,直接顶塑性区则呈"矩形"形态,且存在肩角稳定区域.提出了"倒梯形"塑性区形成的层理面剪切破坏作用机制:在深部高应力(尤其是高水平应力)以及顶煤较大下沉产生的附加水平应力作用下,顶煤和直接顶之间的层理面发生剪切破坏,并引起其附近煤体破坏,促进了顶煤"倒梯形"塑性区的形成.基于此,提出了高强高预紧力锚杆和斜拉锚索梁联合支护围岩控制技术,认为斜拉锚索可锚固在肩角稳定区域,并起到限制顶煤与直接顶岩层之间层理面的剪切变形、阻止顶煤塑性区由"拱形"向"倒梯形"发展的作用.研究成果成功应用于工程实践.
針對深部高地應力、大斷麵、厚頂煤巷道圍巖控製難題,採用理論分析、數值計算等方法研究瞭其變形破壞機製及其控製技術.研究結果錶明,深部大斷麵厚頂煤巷道頂煤塑性區呈"拱形"或上寬下窄的"倒梯形"形態,直接頂塑性區則呈"矩形"形態,且存在肩角穩定區域.提齣瞭"倒梯形"塑性區形成的層理麵剪切破壞作用機製:在深部高應力(尤其是高水平應力)以及頂煤較大下沉產生的附加水平應力作用下,頂煤和直接頂之間的層理麵髮生剪切破壞,併引起其附近煤體破壞,促進瞭頂煤"倒梯形"塑性區的形成.基于此,提齣瞭高彊高預緊力錨桿和斜拉錨索樑聯閤支護圍巖控製技術,認為斜拉錨索可錨固在肩角穩定區域,併起到限製頂煤與直接頂巖層之間層理麵的剪切變形、阻止頂煤塑性區由"拱形"嚮"倒梯形"髮展的作用.研究成果成功應用于工程實踐.
침대심부고지응력、대단면、후정매항도위암공제난제,채용이론분석、수치계산등방법연구료기변형파배궤제급기공제기술.연구결과표명,심부대단면후정매항도정매소성구정"공형"혹상관하착적"도제형"형태,직접정소성구칙정"구형"형태,차존재견각은정구역.제출료"도제형"소성구형성적층리면전절파배작용궤제:재심부고응력(우기시고수평응력)이급정매교대하침산생적부가수평응력작용하,정매화직접정지간적층리면발생전절파배,병인기기부근매체파배,촉진료정매"도제형"소성구적형성.기우차,제출료고강고예긴력묘간화사랍묘색량연합지호위암공제기술,인위사랍묘색가묘고재견각은정구역,병기도한제정매여직접정암층지간층리면적전절변형、조지정매소성구유"공형"향"도제형"발전적작용.연구성과성공응용우공정실천.