化学工程
化學工程
화학공정
CHEMICAL ENGINEERING
2011年
5期
59-62
,共4页
周吉成%朱冬生%唐新宜%刘庆亮
週吉成%硃鼕生%唐新宜%劉慶亮
주길성%주동생%당신의%류경량
扭曲管%扭曲管换热器%壳程%数值模拟
扭麯管%扭麯管換熱器%殼程%數值模擬
뉴곡관%뉴곡관환열기%각정%수치모의
扭曲管因具有较好的强化传热性能得到关注,针对扭曲管管内流体流动及传热性能进行了实验与数值研究.验证了扭曲管在低Re下,与普通圆管相比具有较好的强化传热性能.利用FLUENT软件,研究了扭曲管换热器壳程流体流动及传热的特性.对壳程流速在0.3-1.0 m/s的情况下,分别得到了壳程流体的速度矢量分布、温度场分布、质点迹线、压力分布等特性数据,并根据模拟所得结果对扭曲管换热器壳程流体的流动及传热特性进行了分析.结论是扭曲管换热器壳程特殊结构对于减小壳程流体流动压降,增强壳程流体换热起到了较好作用.最后将模拟结果与实验相对比,得出二者偏差在12%以内,吻合良好.
扭麯管因具有較好的彊化傳熱性能得到關註,針對扭麯管管內流體流動及傳熱性能進行瞭實驗與數值研究.驗證瞭扭麯管在低Re下,與普通圓管相比具有較好的彊化傳熱性能.利用FLUENT軟件,研究瞭扭麯管換熱器殼程流體流動及傳熱的特性.對殼程流速在0.3-1.0 m/s的情況下,分彆得到瞭殼程流體的速度矢量分佈、溫度場分佈、質點跡線、壓力分佈等特性數據,併根據模擬所得結果對扭麯管換熱器殼程流體的流動及傳熱特性進行瞭分析.結論是扭麯管換熱器殼程特殊結構對于減小殼程流體流動壓降,增彊殼程流體換熱起到瞭較好作用.最後將模擬結果與實驗相對比,得齣二者偏差在12%以內,吻閤良好.
뉴곡관인구유교호적강화전열성능득도관주,침대뉴곡관관내류체류동급전열성능진행료실험여수치연구.험증료뉴곡관재저Re하,여보통원관상비구유교호적강화전열성능.이용FLUENT연건,연구료뉴곡관환열기각정류체류동급전열적특성.대각정류속재0.3-1.0 m/s적정황하,분별득도료각정류체적속도시량분포、온도장분포、질점적선、압력분포등특성수거,병근거모의소득결과대뉴곡관환열기각정류체적류동급전열특성진행료분석.결론시뉴곡관환열기각정특수결구대우감소각정류체류동압강,증강각정류체환열기도료교호작용.최후장모의결과여실험상대비,득출이자편차재12%이내,문합량호.