工具技术
工具技術
공구기술
TOOL ENGINEERING
2010年
4期
22-24
,共3页
于超%王明海%王焱%鲍永杰
于超%王明海%王焱%鮑永傑
우초%왕명해%왕염%포영걸
钛合金Ti600%氢含量%切削加工性
鈦閤金Ti600%氫含量%切削加工性
태합금Ti600%경함량%절삭가공성
通过对不同氢含量Ti600合金试件进行车削试验,测量切削力和加工后表面粗糙度并观察切屑形貌,研究了氢对Ti600合金切削加工性的影响.试验结果表明:随氢含量增加,Ti600合金的切削加工性提高,并且有一个最佳氢含量范围;超过该氖含量范围,随氢含量增加,Ti600合金切削加工性变差.
通過對不同氫含量Ti600閤金試件進行車削試驗,測量切削力和加工後錶麵粗糙度併觀察切屑形貌,研究瞭氫對Ti600閤金切削加工性的影響.試驗結果錶明:隨氫含量增加,Ti600閤金的切削加工性提高,併且有一箇最佳氫含量範圍;超過該氖含量範圍,隨氫含量增加,Ti600閤金切削加工性變差.
통과대불동경함량Ti600합금시건진행차삭시험,측량절삭력화가공후표면조조도병관찰절설형모,연구료경대Ti600합금절삭가공성적영향.시험결과표명:수경함량증가,Ti600합금적절삭가공성제고,병차유일개최가경함량범위;초과해내함량범위,수경함량증가,Ti600합금절삭가공성변차.