浙江大学学报(工学版)
浙江大學學報(工學版)
절강대학학보(공학판)
JOURNAL OF ZHEJIANG UNIVERSITY(ENGINEERING SCIENCE)
2005年
4期
556-561
,共6页
周安安%翁志学%单国荣%黄志明%潘祖仁
週安安%翁誌學%單國榮%黃誌明%潘祖仁
주안안%옹지학%단국영%황지명%반조인
环硅氧烷%水%开环聚合%黏度模型
環硅氧烷%水%開環聚閤%黏度模型
배규양완%수%개배취합%점도모형
以八甲基环四硅氧烷为单体,四甲基氢氧化铵为催化剂,微量水为链封端剂,进行有水条件下环硅氧烷阴离子开环聚合.采用凝胶渗透色谱(GPC)测定转化率及合成聚合物的相对分子质量,旋转黏度计测定聚合体系表观黏度.建立体系黏度-相对分子质量-转化率数学模型,关联了体系黏度、转化率和相对分子质量三个过程参数,模型预测值与实测值吻合良好.研究还发现反应的体系黏度随反应单调增长,使得该反应在工程上采用管式反应器实现连续化生产成为可能.同时应用体系黏度-相对分子质量-转化率模型,讨论了反应条件对体系黏度的变化规律.模拟结果表明,体系黏度随聚合温度及水浓度的增加而降低,随催化剂浓度的增加而增加.
以八甲基環四硅氧烷為單體,四甲基氫氧化銨為催化劑,微量水為鏈封耑劑,進行有水條件下環硅氧烷陰離子開環聚閤.採用凝膠滲透色譜(GPC)測定轉化率及閤成聚閤物的相對分子質量,鏇轉黏度計測定聚閤體繫錶觀黏度.建立體繫黏度-相對分子質量-轉化率數學模型,關聯瞭體繫黏度、轉化率和相對分子質量三箇過程參數,模型預測值與實測值吻閤良好.研究還髮現反應的體繫黏度隨反應單調增長,使得該反應在工程上採用管式反應器實現連續化生產成為可能.同時應用體繫黏度-相對分子質量-轉化率模型,討論瞭反應條件對體繫黏度的變化規律.模擬結果錶明,體繫黏度隨聚閤溫度及水濃度的增加而降低,隨催化劑濃度的增加而增加.
이팔갑기배사규양완위단체,사갑기경양화안위최화제,미량수위련봉단제,진행유수조건하배규양완음리자개배취합.채용응효삼투색보(GPC)측정전화솔급합성취합물적상대분자질량,선전점도계측정취합체계표관점도.건입체계점도-상대분자질량-전화솔수학모형,관련료체계점도、전화솔화상대분자질량삼개과정삼수,모형예측치여실측치문합량호.연구환발현반응적체계점도수반응단조증장,사득해반응재공정상채용관식반응기실현련속화생산성위가능.동시응용체계점도-상대분자질량-전화솔모형,토론료반응조건대체계점도적변화규률.모의결과표명,체계점도수취합온도급수농도적증가이강저,수최화제농도적증가이증가.