化学世界
化學世界
화학세계
CHEMICAL WORLD
2009年
12期
727-730
,共4页
李海波%张陆旻%曾义红%李彩云%陈大胜
李海波%張陸旻%曾義紅%李綵雲%陳大勝
리해파%장륙민%증의홍%리채운%진대성
甲醇%丙烯%HZSM-5分子筛%乙烯
甲醇%丙烯%HZSM-5分子篩%乙烯
갑순%병희%HZSM-5분자사%을희
methanol%propylene%HZSM-5 molecular sieve%ethylene
以HZSM-5分子筛为催化剂,在固定床反应器中考察了反应温度和原料空速对甲醇制丙烯性能的影响.结果表明,随着反应温度的升高,乙烯和丙烯选择性均增加,但温度过高容易引起催化剂的失活;而随原料空速的增大,甲醇转化率、乙烯和丙烯的选择性均呈下降趋势.最佳的反应条件为反应温度为460℃,原料液时空速为1.4 kg(Methanol)/kg(cat.)·h.对添加粘结剂与未添加粘结剂成型后的催化刺性能比较,表明添加粘结荆成型后,甲醇转化率和丙烯选择性有所下降.
以HZSM-5分子篩為催化劑,在固定床反應器中攷察瞭反應溫度和原料空速對甲醇製丙烯性能的影響.結果錶明,隨著反應溫度的升高,乙烯和丙烯選擇性均增加,但溫度過高容易引起催化劑的失活;而隨原料空速的增大,甲醇轉化率、乙烯和丙烯的選擇性均呈下降趨勢.最佳的反應條件為反應溫度為460℃,原料液時空速為1.4 kg(Methanol)/kg(cat.)·h.對添加粘結劑與未添加粘結劑成型後的催化刺性能比較,錶明添加粘結荊成型後,甲醇轉化率和丙烯選擇性有所下降.
이HZSM-5분자사위최화제,재고정상반응기중고찰료반응온도화원료공속대갑순제병희성능적영향.결과표명,수착반응온도적승고,을희화병희선택성균증가,단온도과고용역인기최화제적실활;이수원료공속적증대,갑순전화솔、을희화병희적선택성균정하강추세.최가적반응조건위반응온도위460℃,원료액시공속위1.4 kg(Methanol)/kg(cat.)·h.대첨가점결제여미첨가점결제성형후적최화자성능비교,표명첨가점결형성형후,갑순전화솔화병희선택성유소하강.
The effects of temperature and liquid hour space velocity(LHSV)on the conversion of methanol to propylene over HZSM-5 were investigated in a fixed bed reactor.As the temperature increased,the selectivity to ethylene and propylene both increased.However,coke formation which could make the catalyst deactivate increased with the increase of temperature.Conversion of methanol,selectivity to ethylene and propylene all decreased with increasing LHSV at 460℃.The best results were obtained at LHSV of 1.4 h~(-1) and 460℃.The effect of the pelletizing agent,colloidal silica was also studied.The conversion of methanol and selectivity to propylene of the catalyst were decreased after adding colloidal silica.