有色金属
有色金屬
유색금속
NONFERROUS METALS
2009年
4期
39-42
,共4页
王敬忠%颜学柏%阎静亚%容耀%严平%刘勇
王敬忠%顏學柏%閻靜亞%容耀%嚴平%劉勇
왕경충%안학백%염정아%용요%엄평%류용
金属材料%钛-钢复合板%过渡层%工业纯铁%结合强度
金屬材料%鈦-鋼複閤闆%過渡層%工業純鐵%結閤彊度
금속재료%태-강복합판%과도층%공업순철%결합강도
研究加热温度分别在830,880,950和1000℃的情况下,工业纯铁作为钛-钢复合板的过渡材料对复合板结合强度影响.结果表明,随着加工温度升高,复合板的结合强度降低,结合强度的稳定性也降低,复合板结合界面变得粗糙.生产薄复合板时,终轧温度较低,加工硬化严重,抗托强度不能满足标准要求,需要进行退火.在550~650℃之间退火,复合板的结合强度略有升高,在650℃时保温1 h可得到比较高的结合强度.通过金相观察,在结合界面上有显微裂纹存在,这种裂纹使结合强度降低.
研究加熱溫度分彆在830,880,950和1000℃的情況下,工業純鐵作為鈦-鋼複閤闆的過渡材料對複閤闆結閤彊度影響.結果錶明,隨著加工溫度升高,複閤闆的結閤彊度降低,結閤彊度的穩定性也降低,複閤闆結閤界麵變得粗糙.生產薄複閤闆時,終軋溫度較低,加工硬化嚴重,抗託彊度不能滿足標準要求,需要進行退火.在550~650℃之間退火,複閤闆的結閤彊度略有升高,在650℃時保溫1 h可得到比較高的結閤彊度.通過金相觀察,在結閤界麵上有顯微裂紋存在,這種裂紋使結閤彊度降低.
연구가열온도분별재830,880,950화1000℃적정황하,공업순철작위태-강복합판적과도재료대복합판결합강도영향.결과표명,수착가공온도승고,복합판적결합강도강저,결합강도적은정성야강저,복합판결합계면변득조조.생산박복합판시,종알온도교저,가공경화엄중,항탁강도불능만족표준요구,수요진행퇴화.재550~650℃지간퇴화,복합판적결합강도략유승고,재650℃시보온1 h가득도비교고적결합강도.통과금상관찰,재결합계면상유현미렬문존재,저충렬문사결합강도강저.