光学精密工程
光學精密工程
광학정밀공정
OPTICS AND PRECISION ENGINEERING
2011年
7期
1444-1450
,共7页
三线阵测绘相机%光学设计%公差分析
三線陣測繪相機%光學設計%公差分析
삼선진측회상궤%광학설계%공차분석
针对三线阵测绘相机光学系统设计的指标要求,综合考虑空间环境适应性、结构布局等因素,采用像方远心光路设计了一种兼具匹兹瓦型与对称型优点的新型光学系统结构.该系统在Nyquist频率77 lp/mm时,正视相机全视场的平均传递函数为0.613,前、后视相机全视场的平均传递函数为0.578;正视相机畸变为2 × 10(-5),前、后视相机畸变为2.4× 10(-5).运用公差的灵敏度分析和反转灵敏度分析,计算了系统内各公差参数对光学系统成像质量的影响,给出合理的公差要求及合适的补偿调整参数.按给定的公差要求,加工、装调了具有较高成像质量的光学系统.实验检测结果表明,各相机光学系统传递函数的测试值均在0.451以上,满足实验室静态传递函数>0.2,相对畸变<3×10(-4)的指标要求,制定的公差合理、可行,验证了公差分析与研究方法的正确性.
針對三線陣測繪相機光學繫統設計的指標要求,綜閤攷慮空間環境適應性、結構佈跼等因素,採用像方遠心光路設計瞭一種兼具匹玆瓦型與對稱型優點的新型光學繫統結構.該繫統在Nyquist頻率77 lp/mm時,正視相機全視場的平均傳遞函數為0.613,前、後視相機全視場的平均傳遞函數為0.578;正視相機畸變為2 × 10(-5),前、後視相機畸變為2.4× 10(-5).運用公差的靈敏度分析和反轉靈敏度分析,計算瞭繫統內各公差參數對光學繫統成像質量的影響,給齣閤理的公差要求及閤適的補償調整參數.按給定的公差要求,加工、裝調瞭具有較高成像質量的光學繫統.實驗檢測結果錶明,各相機光學繫統傳遞函數的測試值均在0.451以上,滿足實驗室靜態傳遞函數>0.2,相對畸變<3×10(-4)的指標要求,製定的公差閤理、可行,驗證瞭公差分析與研究方法的正確性.
침대삼선진측회상궤광학계통설계적지표요구,종합고필공간배경괄응성、결구포국등인소,채용상방원심광로설계료일충겸구필자와형여대칭형우점적신형광학계통결구.해계통재Nyquist빈솔77 lp/mm시,정시상궤전시장적평균전체함수위0.613,전、후시상궤전시장적평균전체함수위0.578;정시상궤기변위2 × 10(-5),전、후시상궤기변위2.4× 10(-5).운용공차적령민도분석화반전령민도분석,계산료계통내각공차삼수대광학계통성상질량적영향,급출합리적공차요구급합괄적보상조정삼수.안급정적공차요구,가공、장조료구유교고성상질량적광학계통.실험검측결과표명,각상궤광학계통전체함수적측시치균재0.451이상,만족실험실정태전체함수>0.2,상대기변<3×10(-4)적지표요구,제정적공차합리、가행,험증료공차분석여연구방법적정학성.