合肥工业大学学报(自然科学版)
閤肥工業大學學報(自然科學版)
합비공업대학학보(자연과학판)
JOURNAL OF HEFEI UNIVERSITY OF TECHNOLOGY(NATURAL SCIENCE)
2012年
5期
662-668
,共7页
隧道工程%多孔水泥混凝土%孔隙率%级配%强度
隧道工程%多孔水泥混凝土%孔隙率%級配%彊度
수도공정%다공수니혼응토%공극솔%급배%강도
孔隙率是隧道路面多孔水泥混凝土的重要技术指标之一,保证多孔混凝土试件成型后或路面铺筑后的实测孔隙率与目标孔隙率基本一致,同时保证其具有足够大小的有效孔隙率,是高性能多孔混凝土隧道路面配合比设计的关键.依据隧道路面的功能要求,文章选定目标孔隙率为18%.级配对混凝土强度影响非常明显,随着10~15mm集料比例的增加,强度先增大后减小.当采用玄武岩等吸水率偏大的集料制备多孔水泥混凝土时,在有效孔隙率计算中应考虑集料吸水的影响.矿料级配对孔隙率的影响规律为:随着10~15 mm集料比例的增大,计算孔隙率变化幅度很小,且与目标孔隙率(18%)接近;有效孔隙率呈增大的趋势,实测孔隙率先减小后增大;级配2#-2实测孔隙率最小且与目标孔隙率最接近.依据孔隙率及强度试验结果,选取级配2#-2为最佳级配.
孔隙率是隧道路麵多孔水泥混凝土的重要技術指標之一,保證多孔混凝土試件成型後或路麵鋪築後的實測孔隙率與目標孔隙率基本一緻,同時保證其具有足夠大小的有效孔隙率,是高性能多孔混凝土隧道路麵配閤比設計的關鍵.依據隧道路麵的功能要求,文章選定目標孔隙率為18%.級配對混凝土彊度影響非常明顯,隨著10~15mm集料比例的增加,彊度先增大後減小.噹採用玄武巖等吸水率偏大的集料製備多孔水泥混凝土時,在有效孔隙率計算中應攷慮集料吸水的影響.礦料級配對孔隙率的影響規律為:隨著10~15 mm集料比例的增大,計算孔隙率變化幅度很小,且與目標孔隙率(18%)接近;有效孔隙率呈增大的趨勢,實測孔隙率先減小後增大;級配2#-2實測孔隙率最小且與目標孔隙率最接近.依據孔隙率及彊度試驗結果,選取級配2#-2為最佳級配.
공극솔시수도로면다공수니혼응토적중요기술지표지일,보증다공혼응토시건성형후혹로면포축후적실측공극솔여목표공극솔기본일치,동시보증기구유족구대소적유효공극솔,시고성능다공혼응토수도로면배합비설계적관건.의거수도로면적공능요구,문장선정목표공극솔위18%.급배대혼응토강도영향비상명현,수착10~15mm집료비례적증가,강도선증대후감소.당채용현무암등흡수솔편대적집료제비다공수니혼응토시,재유효공극솔계산중응고필집료흡수적영향.광료급배대공극솔적영향규률위:수착10~15 mm집료비례적증대,계산공극솔변화폭도흔소,차여목표공극솔(18%)접근;유효공극솔정증대적추세,실측공극솔선감소후증대;급배2#-2실측공극솔최소차여목표공극솔최접근.의거공극솔급강도시험결과,선취급배2#-2위최가급배.