印染
印染
인염
DYEING AND FINISHING
2009年
22期
9-12,16
,共5页
涂层整理%湿法%聚偏氟乙烯%织物%聚对苯二甲酸乙二酯纤维
塗層整理%濕法%聚偏氟乙烯%織物%聚對苯二甲痠乙二酯纖維
도층정리%습법%취편불을희%직물%취대분이갑산을이지섬유
coating finish%wet process%polyvinylidene fluoride%fabric%polyester fiber
采用聚偏氟乙烯(PVDF)涂层液对涤纶织物进行湿法涂层以制备洁净服面料,讨论各工艺因素对涂层面料性能的影响.试验获得的优化工艺条件为:PVDF用量14%,添加剂LiCl 3%,预挥发时间30s,凝固浴的组成为氯化钠:去离子水=5:95,涂层量5-7g/m~2.采用优化工艺制得的洁净服面料,滤尘性高达90%,透湿和透气性也较好.
採用聚偏氟乙烯(PVDF)塗層液對滌綸織物進行濕法塗層以製備潔淨服麵料,討論各工藝因素對塗層麵料性能的影響.試驗穫得的優化工藝條件為:PVDF用量14%,添加劑LiCl 3%,預揮髮時間30s,凝固浴的組成為氯化鈉:去離子水=5:95,塗層量5-7g/m~2.採用優化工藝製得的潔淨服麵料,濾塵性高達90%,透濕和透氣性也較好.
채용취편불을희(PVDF)도층액대조륜직물진행습법도층이제비길정복면료,토론각공예인소대도층면료성능적영향.시험획득적우화공예조건위:PVDF용량14%,첨가제LiCl 3%,예휘발시간30s,응고욕적조성위록화납:거리자수=5:95,도층량5-7g/m~2.채용우화공예제득적길정복면료,려진성고체90%,투습화투기성야교호.
Polyester cleanroom fabrics were prepared by wet coating process using polyvinylidene fluoride. The effects of process conditions on the coated fabric properties were studied. It was found that the optimum process conditions were as fol-lows: PVDF mass fraction 14%, LiCI 3%, pre-evaporating time 30 s, the composition of coagulation bath NaCI: H_2O =5 :95,coating amounts 5 ~ 7 g/m~2. The particle filtration of the dustproof fabric was as high as 90%; the moisture and air permeabili-ty were excellent meanwhile.