热能动力工程
熱能動力工程
열능동력공정
JOURNAL OF ENGINEERING FOR THERMAL ENERGY AND POWER
2007年
5期
534-538
,共5页
邢菲%樊未军%崔金雷%邓元凯
邢菲%樊未軍%崔金雷%鄧元凱
형비%번미군%최금뢰%산원개
锅炉燃烧%温度分布%NOx排放%数值模拟
鍋爐燃燒%溫度分佈%NOx排放%數值模擬
과로연소%온도분포%NOx배방%수치모의
针对国内某电厂200 MW四角切圆锅炉NOx排放量较高,结渣严重的问题,利用CFD软件平台,采用数值模拟方法对其改造前后炉内燃烧过程进行研究.计算结果表明:由于附壁射流的作用,使得高温区集中在炉膛中部,有效地防止了锅炉结渣;改造后炉内有比常规燃烧方式锅炉更大的还原气氛区域,抑制了NOx的产生,使其排放降低34.6%.改造后的计算结果与试验相符的较好,所以此次数值模拟为锅炉设计、改造和运行提供理论依据.
針對國內某電廠200 MW四角切圓鍋爐NOx排放量較高,結渣嚴重的問題,利用CFD軟件平檯,採用數值模擬方法對其改造前後爐內燃燒過程進行研究.計算結果錶明:由于附壁射流的作用,使得高溫區集中在爐膛中部,有效地防止瞭鍋爐結渣;改造後爐內有比常規燃燒方式鍋爐更大的還原氣氛區域,抑製瞭NOx的產生,使其排放降低34.6%.改造後的計算結果與試驗相符的較好,所以此次數值模擬為鍋爐設計、改造和運行提供理論依據.
침대국내모전엄200 MW사각절원과로NOx배방량교고,결사엄중적문제,이용CFD연건평태,채용수치모의방법대기개조전후로내연소과정진행연구.계산결과표명:유우부벽사류적작용,사득고온구집중재로당중부,유효지방지료과로결사;개조후로내유비상규연소방식과로경대적환원기분구역,억제료NOx적산생,사기배방강저34.6%.개조후적계산결과여시험상부적교호,소이차차수치모의위과로설계、개조화운행제공이론의거.