热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2010年
20期
144-148
,共5页
朱林%何宏梅%单以银%杨柯
硃林%何宏梅%單以銀%楊柯
주림%하굉매%단이은%양가
弹簧钢%硬度%韧性%显微组织%膨胀曲线
彈簧鋼%硬度%韌性%顯微組織%膨脹麯線
탄황강%경도%인성%현미조직%팽창곡선
研究了回火工艺对51CrV4钢弹簧材料硬度的影响,结合热膨胀曲线的变化与不同回火温度下钢的微观组织特征,分析了系列回火温度下钢的冲击韧度变化规律.结果表明,该钢的硬度在回火初期下降较快,30min后达到稳定值;该钢在连续升温过程中的膨胀量变化所揭示的组织变化与对应温度的各回火温度下钢的微观组织相吻合,能很好地解释冲击韧度随回火温度的变化规律.
研究瞭迴火工藝對51CrV4鋼彈簧材料硬度的影響,結閤熱膨脹麯線的變化與不同迴火溫度下鋼的微觀組織特徵,分析瞭繫列迴火溫度下鋼的遲擊韌度變化規律.結果錶明,該鋼的硬度在迴火初期下降較快,30min後達到穩定值;該鋼在連續升溫過程中的膨脹量變化所揭示的組織變化與對應溫度的各迴火溫度下鋼的微觀組織相吻閤,能很好地解釋遲擊韌度隨迴火溫度的變化規律.
연구료회화공예대51CrV4강탄황재료경도적영향,결합열팽창곡선적변화여불동회화온도하강적미관조직특정,분석료계렬회화온도하강적충격인도변화규률.결과표명,해강적경도재회화초기하강교쾌,30min후체도은정치;해강재련속승온과정중적팽창량변화소게시적조직변화여대응온도적각회화온도하강적미관조직상문합,능흔호지해석충격인도수회화온도적변화규률.