石油钻采工艺
石油鑽採工藝
석유찬채공예
OIL DRILLING & PRODUCTION TECHNOLOGY
2009年
3期
5-9
,共5页
代大良%王镇全%潘起峰%高德利
代大良%王鎮全%潘起峰%高德利
대대량%왕진전%반기봉%고덕리
肯吉亚克油田%PDC钻头%结构参数%有限元分析%室内实验
肯吉亞剋油田%PDC鑽頭%結構參數%有限元分析%室內實驗
긍길아극유전%PDC찬두%결구삼수%유한원분석%실내실험
为提高肯吉亚克油田非盐丘井钻井速度,根据地层岩石力学参数评价结果,利用有限元方法对影响PDC钻头攻击性和抗冲击性的齿前角、冠部形状等结构参数与破岩效果之间的关系进行了研究,并对PDC钻头的结构进行了优化设计.根据设计结果试制了直径为120.65mm、齿前角分别为-15°、0°、和5°的3只PDC钻头,并在室内同一岩样上进行实钻模拟实验.结果表明,在其他参数相同的条件下,齿前角为5°时钻头的平均机械钻速比齿前角为-15°时提高42%,说明增加PDC钻头齿前角是提高钻头攻击性的有效方法,这与数值模拟结果是一致的.研究结果为该地区全尺寸钻头的制造提供了理论依据.
為提高肯吉亞剋油田非鹽丘井鑽井速度,根據地層巖石力學參數評價結果,利用有限元方法對影響PDC鑽頭攻擊性和抗遲擊性的齒前角、冠部形狀等結構參數與破巖效果之間的關繫進行瞭研究,併對PDC鑽頭的結構進行瞭優化設計.根據設計結果試製瞭直徑為120.65mm、齒前角分彆為-15°、0°、和5°的3隻PDC鑽頭,併在室內同一巖樣上進行實鑽模擬實驗.結果錶明,在其他參數相同的條件下,齒前角為5°時鑽頭的平均機械鑽速比齒前角為-15°時提高42%,說明增加PDC鑽頭齒前角是提高鑽頭攻擊性的有效方法,這與數值模擬結果是一緻的.研究結果為該地區全呎吋鑽頭的製造提供瞭理論依據.
위제고긍길아극유전비염구정찬정속도,근거지층암석역학삼수평개결과,이용유한원방법대영향PDC찬두공격성화항충격성적치전각、관부형상등결구삼수여파암효과지간적관계진행료연구,병대PDC찬두적결구진행료우화설계.근거설계결과시제료직경위120.65mm、치전각분별위-15°、0°、화5°적3지PDC찬두,병재실내동일암양상진행실찬모의실험.결과표명,재기타삼수상동적조건하,치전각위5°시찬두적평균궤계찬속비치전각위-15°시제고42%,설명증가PDC찬두치전각시제고찬두공격성적유효방법,저여수치모의결과시일치적.연구결과위해지구전척촌찬두적제조제공료이론의거.