广东化工
廣東化工
엄동화공
GUANGDONG CHEMICAL INDUSTRY
2010年
10期
234-235
,共2页
庄会栋%刘勃%季华东%洪卫%苏颖
莊會棟%劉勃%季華東%洪衛%囌穎
장회동%류발%계화동%홍위%소영
Fenton氧化%电解%水解酸化%好氧BAF%塑料助剂废水
Fenton氧化%電解%水解痠化%好氧BAF%塑料助劑廢水
Fenton양화%전해%수해산화%호양BAF%소료조제폐수
fenton oxidation: electrolysis%hydrolytic acidification%immobilized microorganisms: plastic additives wastcwater
采用Fenton氧化-电解-水解酸化-固定化微生物缝合工艺处理塑料助热废水,系统经调试试运行后,废水CODcr8000mg/L左右降为80mg/L以下,处理效率达到99%,排放水质完全达到国家污水综合排放一级标准。
採用Fenton氧化-電解-水解痠化-固定化微生物縫閤工藝處理塑料助熱廢水,繫統經調試試運行後,廢水CODcr8000mg/L左右降為80mg/L以下,處理效率達到99%,排放水質完全達到國傢汙水綜閤排放一級標準。
채용Fenton양화-전해-수해산화-고정화미생물봉합공예처리소료조열폐수,계통경조시시운행후,폐수CODcr8000mg/L좌우강위80mg/L이하,처리효솔체도99%,배방수질완전체도국가오수종합배방일급표준。
Plastic Additives Wastewater can be treated by means of Fenton oxidation-electrolysis-hydrolytic acidification-Immobilized microorganisms system, Thought debug. Through the operation of this project, the CODCr of effluent can Pall below 80 mg/L from about 8000 mg/L of influent, and also the removal rate can reach 99 %. Quality of effluent was up to the intregrated wastewater discharge standard of the national.