棉纺织技术
棉紡織技術
면방직기술
COTTON TEXTILE TECHNOLOGY
2009年
11期
9-13
,共5页
文顶山%刘燕%肖岩%杨耀斌
文頂山%劉燕%肖巖%楊耀斌
문정산%류연%초암%양요빈
进口棉%棉结%带纤籽屑%消糖处理%纺纱通道%温湿度
進口棉%棉結%帶纖籽屑%消糖處理%紡紗通道%溫濕度
진구면%면결%대섬자설%소당처리%방사통도%온습도
Imported Cotton%Nep%Seed Fragments%Sugar-eliminating Treatment%Spinning Channel%Temperature & Humidity
为解决进口棉纺细号纱棉结高的问题,通过全面掌握进口棉特性、合理配棉,做好高含糖进口棉消糖处理及低回潮进口棉吸湿平衡,选择进口棉与国产棉开清棉、梳棉工序单独加工、棉条混和的工艺路线,合理配置各工序纺纱工艺,强化运转、设备及温湿度等基础管理,解决好进口棉使用中的黏、缠、挂、堵问题.结果使成纱棉结有较大幅度的降低,生产出以进口棉为主体或全进口棉的优质且无异纤的CJ 9.7 tex、CJ 7.3 tex、CJ 5.8 tex细号棉纱,满足了用户质量要求,降低了原料成本,增加了企业效益.
為解決進口棉紡細號紗棉結高的問題,通過全麵掌握進口棉特性、閤理配棉,做好高含糖進口棉消糖處理及低迴潮進口棉吸濕平衡,選擇進口棉與國產棉開清棉、梳棉工序單獨加工、棉條混和的工藝路線,閤理配置各工序紡紗工藝,彊化運轉、設備及溫濕度等基礎管理,解決好進口棉使用中的黏、纏、掛、堵問題.結果使成紗棉結有較大幅度的降低,生產齣以進口棉為主體或全進口棉的優質且無異纖的CJ 9.7 tex、CJ 7.3 tex、CJ 5.8 tex細號棉紗,滿足瞭用戶質量要求,降低瞭原料成本,增加瞭企業效益.
위해결진구면방세호사면결고적문제,통과전면장악진구면특성、합리배면,주호고함당진구면소당처리급저회조진구면흡습평형,선택진구면여국산면개청면、소면공서단독가공、면조혼화적공예로선,합리배치각공서방사공예,강화운전、설비급온습도등기출관리,해결호진구면사용중적점、전、괘、도문제.결과사성사면결유교대폭도적강저,생산출이진구면위주체혹전진구면적우질차무이섬적CJ 9.7 tex、CJ 7.3 tex、CJ 5.8 tex세호면사,만족료용호질량요구,강저료원료성본,증가료기업효익.
To reduce neps of fine yarn spun by imported cotton,imported cotton property were mastered fully,cotton were assorted rationally,sugar-eliminating treatment and humidity absorption of imported cotton were done well.Imported cotton and domestic cotton were opened,picked and carded separately,then card sliver was blended in drawing process,spinning processing parameters were set rationally,basic management including operation,equipment and temperature & humidity was strengthened,imported cotton problem such as coherence,wrapping,hook up and occlusion should be resolved well.Finally finish yarn nep could be reduced greatly,quality of CJ 9.7 tex yarn,CJ 7.3 tex yarn and CJ 5.8 tex yarn which were spun by imported cotton is good and there is no foreign fibre in yarn,yarn quality could reach custom demands.Raw material cost could be reduced and enterprise benefit could be increased.