仪器仪表学报
儀器儀錶學報
의기의표학보
CHINESE JOURNAL OF SCIENTIFIC INSTRUMENT
2011年
10期
2183-2189
,共7页
苗健宇%张立平%田铁印%吴国栋%翟岩
苗健宇%張立平%田鐵印%吳國棟%翟巖
묘건우%장립평%전철인%오국동%적암
测绘相机%测绘基座%光机结构%坐标系
測繪相機%測繪基座%光機結構%坐標繫
측회상궤%측회기좌%광궤결구%좌표계
分析了三线阵CCD立体测绘相机工作原理,设计了一种可工程化实施的测绘相机光机结构,此结构由3台相机互成角度装入测绘基座构成.单相机采用像方远心亚对称光学系统,由单镜组装入薄壁壳体的镜头、基于凸轮导向结构的调焦机构、基准镜和成像电器盒构成.测绘基座为测绘相机的高稳定支撑结构,采用7个筒单元、3个板单元与底座交错形成有机一体的结构形式.星敏支架为星敏感器的安装结构,采用3个简单元和一个圆锥单元相贯而成一体的结构形式.运用PATRAN/NAS-TRAN软件对测绘相机进行工程分析表明,测绘相机组合体的强度和刚度好,满足航天光学遥感器的要求.振动试验结果表明,测绘相机一阶固有频率大于100 Hz,不会与整星产生共振;通过各种环境试验后,相机间基准镜坐标系变化小于4″,测绘相机测量坐标系变化小于5″.通过在轨运行表明,测绘相机结构稳定,满足测绘精度要求.
分析瞭三線陣CCD立體測繪相機工作原理,設計瞭一種可工程化實施的測繪相機光機結構,此結構由3檯相機互成角度裝入測繪基座構成.單相機採用像方遠心亞對稱光學繫統,由單鏡組裝入薄壁殼體的鏡頭、基于凸輪導嚮結構的調焦機構、基準鏡和成像電器盒構成.測繪基座為測繪相機的高穩定支撐結構,採用7箇筒單元、3箇闆單元與底座交錯形成有機一體的結構形式.星敏支架為星敏感器的安裝結構,採用3箇簡單元和一箇圓錐單元相貫而成一體的結構形式.運用PATRAN/NAS-TRAN軟件對測繪相機進行工程分析錶明,測繪相機組閤體的彊度和剛度好,滿足航天光學遙感器的要求.振動試驗結果錶明,測繪相機一階固有頻率大于100 Hz,不會與整星產生共振;通過各種環境試驗後,相機間基準鏡坐標繫變化小于4″,測繪相機測量坐標繫變化小于5″.通過在軌運行錶明,測繪相機結構穩定,滿足測繪精度要求.
분석료삼선진CCD입체측회상궤공작원리,설계료일충가공정화실시적측회상궤광궤결구,차결구유3태상궤호성각도장입측회기좌구성.단상궤채용상방원심아대칭광학계통,유단경조장입박벽각체적경두、기우철륜도향결구적조초궤구、기준경화성상전기합구성.측회기좌위측회상궤적고은정지탱결구,채용7개통단원、3개판단원여저좌교착형성유궤일체적결구형식.성민지가위성민감기적안장결구,채용3개간단원화일개원추단원상관이성일체적결구형식.운용PATRAN/NAS-TRAN연건대측회상궤진행공정분석표명,측회상궤조합체적강도화강도호,만족항천광학요감기적요구.진동시험결과표명,측회상궤일계고유빈솔대우100 Hz,불회여정성산생공진;통과각충배경시험후,상궤간기준경좌표계변화소우4″,측회상궤측량좌표계변화소우5″.통과재궤운행표명,측회상궤결구은정,만족측회정도요구.