制导与引信
製導與引信
제도여인신
GUIDANCE & FUZE
2011年
3期
29-31
,共3页
缝隙天线%毫米波%泰勒分布
縫隙天線%毫米波%泰勒分佈
봉극천선%호미파%태륵분포
crevice antenna%millimeter wave%Taylor distribution
通过对Stevenson缝隙偏移位置公式进行修正,设计了一个工作于V波段的波导缝隙阵列天线。仿真结果表明,利用修正公式,可快速、准确地设计出高性能低副瓣波导缝隙阵列天线。天线增益17dB,H面主波束偏转60。副瓣电平小于一32dB。
通過對Stevenson縫隙偏移位置公式進行脩正,設計瞭一箇工作于V波段的波導縫隙陣列天線。倣真結果錶明,利用脩正公式,可快速、準確地設計齣高性能低副瓣波導縫隙陣列天線。天線增益17dB,H麵主波束偏轉60。副瓣電平小于一32dB。
통과대Stevenson봉극편이위치공식진행수정,설계료일개공작우V파단적파도봉극진렬천선。방진결과표명,이용수정공식,가쾌속、준학지설계출고성능저부판파도봉극진렬천선。천선증익17dB,H면주파속편전60。부판전평소우일32dB。
A slotted waveguide antenna operating in V-band is designed using a modified Stevenson formula to determine the offset of the waveguide slots. The numerical simulation results show that a waveguide antenna of high performance can be designed by the modified formula quickly and accurately. The antenna exhibits an excellent performance with gain 17 dB, beam tilt angle 60~, and low sidelobes levels are less than --32 dB.