应用化工
應用化工
응용화공
APPLIED CHEMICAL INDUSTRY
2012年
6期
938-942
,共5页
纳米二氧化钛%硅钨酸%负载型催化剂%α-蒎烯%催化异构
納米二氧化鈦%硅鎢痠%負載型催化劑%α-蒎烯%催化異構
납미이양화태%규오산%부재형최화제%α-파희%최화이구
采用溶胶-凝胶法和浸溃法,制备了纳米负载型H4SiW12O40 (SWA)催化剂,考察了载体种类、SWA浸溃浓度对催化剂性能的影响.结果表明,用TiO2固载、8% SWA浸渍所得催化剂SWA/TiO2的催化性能较佳.利用XRD、TEM和BET比表面测定技术对其结构进行了表征.结果显示,该催化剂颗粒为圆球形,粒径为40~50 nm,具有较好的分散性.载体TiO2的引入明显增大了SWA的比表面积.将纳米SWA/TiO2用于催化α-蒎烯异构化反应,实验结果表明,该催化剂具有较好的催化活性和选择性,异构化反应的主产物是莰烯.在适宜的实验条件下,α-蒎烯的转化率达98%,莰烯的产率达58%.与其它负载型催化剂比较,SWA/TiO2具有用量少、活性高、反应时间短等特点.
採用溶膠-凝膠法和浸潰法,製備瞭納米負載型H4SiW12O40 (SWA)催化劑,攷察瞭載體種類、SWA浸潰濃度對催化劑性能的影響.結果錶明,用TiO2固載、8% SWA浸漬所得催化劑SWA/TiO2的催化性能較佳.利用XRD、TEM和BET比錶麵測定技術對其結構進行瞭錶徵.結果顯示,該催化劑顆粒為圓毬形,粒徑為40~50 nm,具有較好的分散性.載體TiO2的引入明顯增大瞭SWA的比錶麵積.將納米SWA/TiO2用于催化α-蒎烯異構化反應,實驗結果錶明,該催化劑具有較好的催化活性和選擇性,異構化反應的主產物是莰烯.在適宜的實驗條件下,α-蒎烯的轉化率達98%,莰烯的產率達58%.與其它負載型催化劑比較,SWA/TiO2具有用量少、活性高、反應時間短等特點.
채용용효-응효법화침궤법,제비료납미부재형H4SiW12O40 (SWA)최화제,고찰료재체충류、SWA침궤농도대최화제성능적영향.결과표명,용TiO2고재、8% SWA침지소득최화제SWA/TiO2적최화성능교가.이용XRD、TEM화BET비표면측정기술대기결구진행료표정.결과현시,해최화제과립위원구형,립경위40~50 nm,구유교호적분산성.재체TiO2적인입명현증대료SWA적비표면적.장납미SWA/TiO2용우최화α-파희이구화반응,실험결과표명,해최화제구유교호적최화활성화선택성,이구화반응적주산물시감희.재괄의적실험조건하,α-파희적전화솔체98%,감희적산솔체58%.여기타부재형최화제비교,SWA/TiO2구유용량소、활성고、반응시간단등특점.