复合材料学报
複閤材料學報
복합재료학보
ACTA MATERIAE COMPOSITAE SINICA
2007年
4期
34-39
,共6页
邓火英%张佐光%顾轶卓%李敏
鄧火英%張佐光%顧軼卓%李敏
산화영%장좌광%고질탁%리민
复合材料%成型缺陷%真空袋成型%L形层板
複閤材料%成型缺陷%真空袋成型%L形層闆
복합재료%성형결함%진공대성형%L형층판
采用真空袋阳模成型法在不同条件下制备了90°的L形玻纤单向布/环氧树脂层板,对层板不同位置处纤维密实和缺陷状况进行了研究,考察了成型过程主要工艺条件对缺陷的影响规律.结果表明,富树脂、孔隙、厚度分布不均和纤维屈曲变形是L形层板中主要的缺陷类型,加压时机、层板尺寸、铺层方式以及边界条件对纤维密实和缺陷的形成都有重要的影响.对以上各种缺陷的产生机制进行了初步分析:剪切流动的存在导致层板厚度分布不均匀而且出现富树脂区;纤维的屈曲变形是由于轴向受压缩力;本文实验条件下孔隙的主要来源是夹杂空气.研究结果对热压工艺中缺陷的预测与控制以及工艺参数的优化具有重要的指导意义.
採用真空袋暘模成型法在不同條件下製備瞭90°的L形玻纖單嚮佈/環氧樹脂層闆,對層闆不同位置處纖維密實和缺陷狀況進行瞭研究,攷察瞭成型過程主要工藝條件對缺陷的影響規律.結果錶明,富樹脂、孔隙、厚度分佈不均和纖維屈麯變形是L形層闆中主要的缺陷類型,加壓時機、層闆呎吋、鋪層方式以及邊界條件對纖維密實和缺陷的形成都有重要的影響.對以上各種缺陷的產生機製進行瞭初步分析:剪切流動的存在導緻層闆厚度分佈不均勻而且齣現富樹脂區;纖維的屈麯變形是由于軸嚮受壓縮力;本文實驗條件下孔隙的主要來源是夾雜空氣.研究結果對熱壓工藝中缺陷的預測與控製以及工藝參數的優化具有重要的指導意義.
채용진공대양모성형법재불동조건하제비료90°적L형파섬단향포/배양수지층판,대층판불동위치처섬유밀실화결함상황진행료연구,고찰료성형과정주요공예조건대결함적영향규률.결과표명,부수지、공극、후도분포불균화섬유굴곡변형시L형층판중주요적결함류형,가압시궤、층판척촌、포층방식이급변계조건대섬유밀실화결함적형성도유중요적영향.대이상각충결함적산생궤제진행료초보분석:전절류동적존재도치층판후도분포불균균이차출현부수지구;섬유적굴곡변형시유우축향수압축력;본문실험조건하공극적주요래원시협잡공기.연구결과대열압공예중결함적예측여공제이급공예삼수적우화구유중요적지도의의.